相关论文: Enhanced field emission from multiwall carbon nano…
The electron field emission of patterned films of nitrogenated carbon nanotubes is shown to be decisively influenced by the deposition conditions. The growth was carried out by decomposing methane in a nitrogen/ammonia atmosphere using hot…
Three different catalysts (Fe, Ni, Co nitrates dissolved in ethanol) were patterned on a SiO2/Si substrate and multi-wall carbon nanotubes were grown by catalytic decomposition of acetylene. We compare the growth of the carbon…
We used microcontact printing to pattern a silicon surface with an iron-containing catalytic solution. Multi-wall carbon nanotubes were subsequently grown on the patterned areas by chemical vapor deposition at temperatures between 650 and…
Highly active, durable and cost-effective electrocatalysts for water oxidation to evolve oxygen gas hold a key to a range of renewable energy solutions including water splitting and rechargeable metal-air batteries. Here, we report the…
Thin films of iron and permalloy Ni80Fe20 were prepared using an Ar+N2 mixture with magnetron sputtering technique at ambient temperature. The nitrogen partial pressure, during sputtering process was varied in the range of 0 to 100%,…
Multiwalled carbon nanotubes have been produced by ethylene catalytic chemical vapor deposition and used to fabricate thick and dense freestanding films ("buckypapers") by membrane filtering. Field emission properties of buckypapers have…
Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 {\deg}C on Fe…
The catalytic activity of nanotubular titanium dioxide films formed during the oxidation of acetone to carbon dioxide under the action of visible light with a wavelength of 450 nm was found to be approximately 2 times higher compared to…
Electron field emission characteristics of individual multiwalled carbon nanotubes have been investigated by a piezoelectric nanomanipulation system operating inside a scanning electron microscopy chamber. The experimental setup ensures a…
The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the…
Recent advances in nanotechnology have provided new materials which have the potential to surpass copper and aluminum alloys in electrical conductivity, weight and ampacity [2-6]. Among these carbon nanotubes (CNTs) stand out due to their…
We prepared three ferrite nanocatalysts: (i) copper ferrite (CuFe2O4), (ii) ferrite where cobalt was substituted by nickel (NixCo1-xFe2O4, with x= 0, 0.2, 0.4, 0.6), and (iii) ferrite where nickel was substituted by zinc (ZnyNi1-yFe2O4 with…
The evolution of a continuous Fe(NO3)3 catalyst film was observed by in-situ annealing in a Transmission Electron Microscope (TEM). Such catalysts are routinely used in the catalytic growth of carbon nanotubes. The experiments reveal that…
The photoluminescence (PL) quantum yield of single-walled carbon nanotubes (SWNTs) is relatively low, with various quenching effects by metallic species reported in the literature. Here, we report the first case of metal enhanced…
Thick anatase films were fabricated on graphite substrates using a method of anodic aqueous electrophoretic-deposition using oxalic acid as a dispersant. Thick films were subsequently fired in air and in nitrogen at a range of temperatures.…
The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon…
Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was…
The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using…
Real time electron microscopy observation on morphological changes in gold nano structures deposited on Si (100) surfaces as a function of annealing temperatures has been reported. Two types of interfaces with the substrate silicon were…
We used scattering-type scanning near-field optical microscopy (s-SNOM) to characterize nickel nanoclusters grown inside single-walled carbon nanotubes (SWCNT). The nanotubes were filled with Ni(II) acetylacetonate and the molecules were…