相关论文: Comparative study of the Portevin-Le Chatelier eff…

Tensile tests have been carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature at a range of strain rates. The Portevin - Le Chatelier (PLC) effect was observed. From an analysis of the…

The Portevin-Le Chatelier (PLC) effect is a kind of plastic instability observed in many dilute alloys when deformed at certain ranges of strain rate and temperature. In this letter we establish that the dynamical process responsible for…

Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at four different temperatures in an intermediate strain rate regime of 2x10-4s-1 to 2x10-3s-1. The Portevin-Le Chatelier (PLC) effect was observed…

The scaling behavior of the Portevin-Le Chatelier (PLC) effect is studied by deforming a substitutional alloy, Al-2.5%Mg and an interstitial alloy, low carbon steel (0.15%C, 0.33%Mn, 0.04%P, 0.05%S, 0.15%Si and rest Iron) at room…

The plastic deformation of dilute alloys is often accompanied by plastic instabilities due to dynamic strain aging and dislocation interaction. The repeated breakaway of dislocations from and their recapture by solute atoms leads to stress…

We investigate the Portevin-Le Chatelier effect (PLC), by compressing Al-Mg alloys in a very large deformation range, and interpret the results from the viewpoint of phase transitions and critical phenomena. The system undergoes two…

Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at room temperature in a wide range of strain rates where the Portevin-Le Chatelier (PLC) effect was observed. The experimental stress-time series data…

The scaling behavior of the Portevin-Le Chatelier (PLC) effect was studied by deforming Al-2.5%Mg alloy for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during…

The Portevin-Le Chatelier(PLC) effect has been investigated by deforming Al-2.5%Mg alloy in the strain rate regime where simultaneously two types (type B and type A) of serrations appear in the stress strain curve. Our analysis reveal that…

The complexity of the Portevin-Le Chatelier effect in Al-2.5%Mg polycrystalline samples subjected to uniaxial tensile tests is quantified. Multiscale entropy analysis is carried out on the stress time series data observed during jerky flow…

A simplified 3D FE model based on McCormick's model is developed to numerically predict the spatiotemporal behaviors of the PLC effect in Ti-12Mo alloy tensile tests at 350 degrees C with strain rates from the order of $10^{-4}$ s$^{-1}$ to…

The influence of the surface pre-deformation on jerky flow caused by the Portevin-Le Chatelier (PLC) effect was investigated using flat tensile specimens of an Al-Mg alloy. Although jerky flow represents a macroscopic plastic instability,…

Tensile tests were carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature for a range of strain rates. The Portevin-Le Chatelier (PLC) effect was observed throughout the strain rate regime.…

Matallic alloys, such as Al or Cu, or mild steel, display plastic instabilities in a well defined range of temperatures and deformation rates, a phenomenon known as the Portevin-Le Chatelelier (PLC) effect. The stick-slip behavior, or…

In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…

Jerky flow in solids results from collective dynamics of dislocations which gives rise to serrated deformation curves and a complex evolution of the strain heterogeneity. A rich example of this phenomenon is the Portevin-Le Chatelier effect…

The chapter presents the problem of the complexity of plastic flow in alloys, which is manifested by serrated deformation curves and transient plastic strain localizations. This phenomenon uncovers an inherently collective nature of the…

Using the density functional theory, we perform a full atomic relaxation of the bulk ferrite with 12.5%-concentration of monoatomic interstitial Cr periodically located at the edges of the bcc Fe$_\alpha$ cell. We show that structural…

In this paper, we investigate plasticity in irradiated FeCrAl nanopillars using discrete dislocation dynamics simulations (DDD), with comparisons to transmission electron microscopic (TEM) in situ tensile tests of ion and neutron irradiated…

Pressure-induced phase transitions of spin-crossover materials were simulated by a Monte Carlo simulation in the constant pressure ensemble for the first time. Here, as the origin of the cooperative interaction, we adopt elastic interaction…