相关论文: Nanotribological characterization of industrial Po…
Atomic Force Microscopy (AFM) is a suitable tool to perform tribological characterization of materials down to the nanometer scale. An important aspect in nanofriction measurements of corrugated samples is the local tilt of the surface,…
The layered structure and the rheological properties of anti-wear films, generated in a rolling/sliding contact from lubricants containing zinc dialkyldithiophosphate (ZDTP) and/or molybdenum dialkyldithiocarbamate (MoDTC) additives, have…
Microtribological properties of vertically-aligned carbon-nanotube (VACNT) films have been studied. Adhesion forces were obtained by measuring force-displacement curves. Friction experiments were conducted in reciprocating sliding…
If polytetrafluoroethylene (PTFE), commonly known as Teflon, is put into contact and rubbed against another material, almost surely it will be more effective than its counterpart in collecting negative charges. This simple, basic property…
Friction is a ubiquitous phenomenon that greatly affects our everyday lives and is responsible for large amounts of energy loss in industrialised societies. Layered materials such as graphene have interesting frictional properties and are…
The frictional properties of individual carbon nanotubes (CNTs) are studied by sliding an atomic force microscopy tip across and along its principle axis. This direction-dependent frictional behavior is found to correlate strongly with the…
We investigate the electromechanical interactions in individual P(VDF-TrFE) nanowires in response to localized electrical poling via a conducting atomic force microscope tip. Spatially resolved measurements of piezoelectric coefficients and…
This study presents a novel, versatile traction force microscopy framework for quantifying three-dimensional (3D) interfacial forces during bio-adhesion by integrating in situ stereo digital image correlation with finite element (FE)…
Two-dimensional (2D) transition metal dichalcogenides are potential candidates for ultrathin solid-state lubricants in low-dimensional systems owing to their flatness, high in-plane mechanical strength, and low shear interlayer strength.…
Recent tribological experiments revealed that graphene is able to lubricate macroscale steel-on-steel sliding contacts very effectively both in dry and humid conditions. This effect has been attributed to a mechanical action of graphene…
Manipulation of metal nanoparticles using atomic force microscope is a promising new technique for probing tribological properties at the nanoscale. In spite of some advancements in experimental investigations, there is no unambiguous…
The texturization of poly(tetrafluoroethylene) (PTFE) surfaces is achieved at atmospheric pressure by using the post-discharge of a radio-frequency plasma torch supplied in helium and oxygen gases. The surface properties are characterized…
Polytetrafluoroethylene (PTFE) is an excellent diffuse reflector widely used in light collection systems for particle physics experiments. In noble element systems, it is often coated with tetraphenyl butadiene (TPB) to allow detection of…
We present a novel experimental platform that links topographical and material changes with the friction and wear behavior of oil-lubricated metal surfaces. This concept combines state-of-the-art methods for the analysis of the surface…
The description of hydrodynamic interactions between a particle and the surrounding liquid, down to the nanometer scale, is of primary importance since confined liquids are ubiquitous in many natural and technological situations. In this…
A MEMS based tribometer has been developed that can be read out with nanometer and nano-Newton resolution, approaching the resolution and sensitivity of a friction force microscope (FFM). It can be used to study friction of MEMS device…
The tribology of a bubble rubbing on a solid surface is studied via interferometry. A unique experimental setup is designed for monitoring the thickness profiles of a wetting film, intercalated between the bubble and hydrophilic glass…
Frictional losses are responsible for significant energy waste in many practical applications, and superlubricity with a coefficient of friction lower than 0.01 is the goal of tribologists. In this paper, metal-on-polymer contact was…
Accurately predicting friction in sliding interfaces that contain third body wear particles is critical for engineering applications such as sliding movement in pistons, bearings, or metal forming. We present a hierarchical multiscale…
We report on the measurement of mechanical properties of the transparent wings of an insect (popularly known as the 'rain fly') using an atomic force microscope (AFM) down to nanometer length scales. We observe that the frictional and…