相关论文: RETROCAM: A Versatile Optical Imager for Synoptic …
ULTRACAM is a portable, high-speed imaging photometer designed to study faint astronomical objects at high temporal resolutions. ULTRACAM employs two dichroic beamsplitters and three frame-transfer CCD cameras to provide three-colour…
OCTOCAM is a multi-channel imager and spectrograph that has been proposed for the 10.4m GTC telescope. It will use dichroics to split the incoming light to produce simultaneous observations in 8 different bands, ranging from the ultraviolet…
ULTRACAM is an ultra-fast, triple-beam CCD camera which has been designed to study one of the few remaining unexplored regions of observational parameter space - high temporal resolution. The camera will see first light in Spring 2002, at a…
HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very…
A real-time image reconstruction method for scanning transmission electron microscopy (STEM) is proposed. With an algorithm requiring only the center of mass (COM) of the diffraction pattern at one probe position at a time, it is able to…
Stretchcam is a thin camera with a lens capable of zooming with small actuations. In our design, an elastic lens array is placed on top of a sparse, rigid array of pixels. This lens array is then stretched using a small mechanical motion in…
We report the development of a high-time resolution, 3-colour, simultaneous optical imaging system for the 2.1 m telescope in San Pedro M\'artir Observatory, M\'exico. OPTICAM will be equipped with three Andor Zyla 4.2-Plus sCMOS cameras…
This article experimentally examines different configurations of a novel multi-camera array microscope (MCAM) imaging technology. The MCAM is based upon a densely packed array of "micro-cameras" to jointly image across a large field-of-view…
The description is given for the speckle interferometer of the BTA 6-m telescope of the SAO RAS based on a new detector with an electron multiplication CCD. The main components of the instrument are microscope objectives, interference…
Hyper-spectral imaging has recently gained increasing attention for use in different applications, including agricultural investigation, ground tracking, remote sensing and many other. However, the high cost, large physical size and…
Herein, we describe the design, implementation and operation principles of an astronomical camera system, based on a large-format CCD261-84 detector with an extremely thick 200 mkm substrate. The DINACON-V controller was used with the CCD…
Hyperspectral imaging is useful for applications ranging from medical diagnostics to agricultural crop monitoring; however, traditional scanning hyperspectral imagers are prohibitively slow and expensive for widespread adoption. Snapshot…
High-Performance Adaptive Optics systems are rapidly spreading as useful applications in the fields of astronomy, ophthalmology, and telecommunications. This technology is critical to enable coronagraphic direct imaging of exoplanets…
A simple method of constructing the 3D surface of non-transparent micro-objects by extending the depth-of-field on the whole attainable surface is presented. The series of images of a sample are recorded by the sequential movement of the…
HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$…
We present a large-scale computational 3D topographic microscope that enables 6-gigapixel profilometric 3D imaging at micron-scale resolution across $>$110 cm$^2$ areas over multi-millimeter axial ranges. Our computational microscope,…
We design a multiscopic vision system that utilizes a low-cost monocular RGB camera to acquire accurate depth estimation for robotic applications. Unlike multi-view stereo with images captured at unconstrained camera poses, the proposed…
We have designed and built a new type of CCD that we call an orthogonal transfer CCD (OTCCD), which permits parallel clocking horizontally as well as vertically. The device has been used successfully to remove image motion caused by…
We present a compact, diffuser-assisted, single-pixel computational camera. A rotating ground glass diffuser is adopted, in preference to a commonly used digital micro-mirror device (DMD), to encode a two-dimensional (2D) image into…
We present an epi-illumination multi-camera array microscope (epi-MCAM) designed for wide-field reflective imaging of non-transparent samples. The epi-MCAM contains 24 tightly packed and synchronized epi-illumination microscope units,…