相关论文: Degradation Dynamics of Perovskite Solar Cells Und…
Electric fields arising from the distribution of charge in metal halide perovskite solar cells are critical for understanding the many weird and wonderful optoelectronic properties displayed by these devices. Mobile ionic defects are…
Optimizing the interfaces in perovskite solar cells (PSCs) is essential for enhancing their performance, improving their stability, and making them commercially viable for large-scale deployment in solar energy harvesting applications.…
Ion and metal diffusion in metal halide perovskites, charge-transporting layers, and electrodes are detrimental to the performance and stability of perovskite-based photovoltaic devices. As a result, there is an intense research interest in…
Tandem perovskite solar cells beckon as lower cost alternatives to conventional single junction solar cells, with all-perovskite tandem photovoltaic architectures showing power conversion efficiencies up to 26.4%. Solution-processing…
Gradual reverse-bias breakdown in metal-halide perovskite diodes and solar cells is thought to originate from hole tunneling through steep bands in an ionic depletion region near the electron transport layer after positively charged iodine…
Extensive studies have focused on degradation of perovskite at low charge carrier density (<10^16 cm^-3), but few have surveyed the degradation mechanism at high charge carrier density (~10^18 cm^-3). Here, we investigate the degradation…
One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the…
Organic-inorganic hybrid perovskite solar cells (PSC) have demonstrated impressive performance improvement. Among the various characteristics, the time-dependent current-voltage (J-V) hysteresis allows a direct exploration of various…
Perovskite solar cells (PSCs) with superior performance have been recognized as a potential candidate in photovoltaic technologies. However, the defects in active perovskite layer induce non-radiative recombination which restricts the…
We analysed perovskite CH3NH3PbI3-xClx inverted planner structure solar cell with nickel oxide (NiO) and spiro-MeOTAD as hole conductors. This structure is free from electron transport layer. The thickness is optimized for NiO and…
Reverse biasing triple-junction GaInP/Ga(In)As/Ge solar cells may affect their performance by the formation of permanent shunts even if the reverse breakdown voltage is not reached. In previous works, it was observed that, amid the three…
Lead poisoning and notorious ambient instability in lead-based halide perovskites pave the way for the exploration of alternative materials for affordable and efficient solar cell fabrication. An important prerequisite to this end is the…
Among the n-type metal oxide materials used in the planar perovskite solar cells, zinc oxide (ZnO) is a promising candidate to replace titanium dioxide (TiO2) due to its relatively high electron mobility, high transparency, and versatile…
Perovskite solar cells are one of the most attracting cells because of remarkably improved power conversion efficiency (PCE) recently. Toward their practical application, it is important not only to increase the PCE but also to elucidate…
The ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering has become an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface…
Metal halide perovskite solar cells have gained widespread attention due to their high efficiency and high defect tolerance. The absorbing perovskite layer is as a mixed electron-ion conductor that supports high rates of ion and charge…
We demonstrate an ionically gated planar PS-PV solar cell with ultra-thick fullerene ETL with a porous CNT electron collector on top of it. Perovskite photovoltaic devices usually have undoped electron transport layers, usually thin like…
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are…
Lead-free tin-based perovskites are highly appealing for the next generation of solar cells due to their intriguing optoelectronic properties. However, the tendency of Sn2+ oxidation to Sn4+ in the tin-based perovskites induces serious film…
Intrinsic and extrinsic ion migration is a very large threat to the operational stability of perovskite solar cells and is difficult to completely eliminate due to the low activation energy of ion migration and the existence of internal…