相关论文: 7-Rod-Core Thulium-Doped Fiber for Enhanced Fiber …
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping…
We developed a new holmium-doped triple-clad fiber (Ho-3CF), reducing the clad diameter to improve the overlap between pump and doped-core, and the holmium concentration to reduce the influence of ion clustering on the laser efficiency. We…
The ultrashort pulse laser operation is crucially defined by engaging explicit modulators. Conventionally, they are laborious to incorporate into an all-fibre design or involve the design of sophisticated cavities. We exploit Thulium-doped…
We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber…
We experimentally analyze the average-power-scaling capabilities of ultrafast, thulium-doped fiber amplifiers. It has been theoretically predicted that thulium-doped fiber laser systems, with an emission wavelength around 2 um, should be…
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94\mu m, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple,…
Deep laser cooling of atoms, ions, and molecules facilitates the study of fundamental physics as well as applied research. In this work, we report on the narrow-line laser cooling of thulium atoms at the wavelength of $506.2\,\textrm{nm}$…
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with…
We report on our realization of a high power holmium doped fiber laser, together with the validation of our numerical simulation of the laser. We first present the rare absolute measurements of the physical parameters that are mandatory to…
Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 {\mu}m and 3.3-3.8 {\mu}m regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly…
We have experimentally studied sub-Doppler laser cooling in a magneto-optical trap for thulium atoms working at the wavelength of 410.6\,nm. Without any dedicated molasses period of sub-Doppler cooling, the cloud of $3\times 10^6$ atoms at…
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small…
Highly-doped holmium fibers have been prepared using modified chemical vapor deposition in combination with nanoparticle-doping method. Within a series of various Al2O3 and Ho3+ concentrations, relations between fibers composition and their…
We built a frequency-doubled laser for 87Rb laser cooling, from a Telecom fiber laser. Thanks to intense technological development, telecom fiber lasers exhibit outstanding properties regarding relative intensity noise and modulation…
In this study, we revealed the impact of the pumping scheme, fiber length, pumping power, and reflectivity of the output fiber Bragg grating on the performance of a Tm^3+ -doped fiber laser (TDFL) operating at a wavelength of 1.72 \mu m.…
A lightsail can be accelerated to ultra-high speed by the radiation pressure of a laser having an intensity of the order of GW/m$^2$, which though presents a critical challenge in the thermal management of lightsails. In this letter, we…
We report watt-level femtosecond pulses in the 1.75 $\mu$m region using a thulium-doped core, terbium-doped cladding fluoride (Tm:Tb:ZBLAN) fiber laser system. The seed pulse is generated through stimulated Raman scattering in a silica…
This approach permits much finer adjustments of the beam direction and position when compared to other beam steering techniques of the same mechanical precision. This results in a much increased precision, accuracy and mechanical stability.…
This paper describes a mode locking technique based on enhanced polarization dependent loss (PDL). The method utilizes a bent single mode fiber (SMF28) coil to induce sufficient PDL at 2 \(\mu\)m wavelength region. Significant PDL in SMF28…
Thermal effects are critical constrains for developing high-power thulium-doped fiber lasers (TDFLs). In this paper, we numerically investigate the lasing and thermal characteristics of the TDFLs under different pump transitions. Our…