相关论文: KISS-IMU: Self-supervised Inertial Odometry with M…

This paper addresses accurate pose estimation (position, velocity, and orientation) for a rigid body using a combination of generic inertial-frame and/or body-frame measurements along with an Inertial Measurement Unit (IMU). By embedding…

In this paper, we present a tightly coupled optimization-based GPS-Visual-Inertial odometry system to solve the trajectory drift of the visual-inertial odometry especially over long-term runs. Visual reprojection residuals, IMU residuals,…

Tunnels and long corridors are challenging environments for mobile robots because a LiDAR point cloud should degenerate in these environments. To tackle point cloud degeneration, this study presents a tightly-coupled LiDAR-IMU-wheel…

In this paper, we study state estimation of multi-visual-inertial systems (MVIS) and develop sensor fusion algorithms to optimally fuse an arbitrary number of asynchronous inertial measurement units (IMUs) or gyroscopes and global and(or)…

Odometry on aerial robots has to be of low latency and high robustness whilst also respecting the Size, Weight, Area and Power (SWAP) constraints as demanded by the size of the robot. A combination of visual sensors coupled with Inertial…

Radar ensures robust sensing capabilities in adverse weather conditions, yet challenges remain due to its high inherent noise level. Existing radar odometry has overcome these challenges with strategies such as filtering spurious points,…

The fusion of visual and inertial measurements is becoming more and more popular in the robotics community since both sources of information complement well each other. However, in order to perform this fusion, the biases of the Inertial…

In this work, we propose a novel method for performing inertial aided navigation, by using deep neural networks (DNNs). To date, most DNN inertial navigation methods focus on the task of inertial odometry, by taking gyroscope and…

Current approaches for visual-inertial odometry (VIO) are able to attain highly accurate state estimation via nonlinear optimization. However, real-time optimization quickly becomes infeasible as the trajectory grows over time, this problem…

We present a real-time monocular thermal-inertial odometry system designed for high-velocity, GPS-denied flight on embedded hardware. The system fuses measurements from a FLIR Boson+ 640 longwave infrared camera, a high-rate IMU, a laser…

Monocular depth estimation has been increasingly adopted in robotics and autonomous driving for its ability to infer scene geometry from a single camera. In self-supervised monocular depth estimation frameworks, the network jointly…

LiDAR odometry is the task of estimating the ego-motion of the sensor from sequential laser scans. This problem has been addressed by the community for more than two decades, and many effective solutions are available nowadays. Most of…

Inertial measurement units (IMUs) are fundamental sensing components in multi-source integrated navigation systems, and their performance directly determines the accuracy and reliability of solutions. However, the precision of low-cost IMUs…

By learning human motion priors, motion capture can be achieved by 6 inertial measurement units (IMUs) in recent years with the development of deep learning techniques, even though the sensor inputs are sparse and noisy. However, human…

Odometer has been proven to significantly improve the accuracy of the Global Navigation Satellite System / Inertial Navigation System (GNSS/INS) integrated vehicle navigation in GNSS-challenged environments. However, the odometer is…

Visual-Inertial Odometry (VIO) utilizes an Inertial Measurement Unit (IMU) to overcome the limitations of Visual Odometry (VO). However, the VIO for vehicles in large-scale outdoor environments still has some difficulties in estimating…

In this paper, we propose a novel dynamic calibration method for sparse inertial motion capture systems, which is the first to break the restrictive absolute static assumption in IMU calibration, i.e., the coordinate drift RG'G and…

Robust and accurate six degree-of-freedom tracking on portable devices remains a challenging problem, especially on small hand-held devices such as smartphones. For improved robustness and accuracy, complementary movement information from…

This paper presents a novel framework for estimating the position and orientation of flexible manipulators undergoing vertical motion using multiple inertial measurement units (IMUs), optimized and calibrated with ground truth data. The…

High-speed ground robots moving on unstructured terrains generate intense high-frequency vibrations, leading to LiDAR scan distortions in Lidar-inertial odometry (LIO). Accurate and efficient undistortion is extremely challenging due to (1)…