相关论文: Thermally Activated Plasticity in Single-Crystal T…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it…
Molecular dynamics simulations on tensile deformation of initially defect free single crystal copper nanowire oriented in <001>{100} has been carried out at 10 K under adiabatic and isothermal loading conditions. The tensile behaviour was…
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and…
Atomistic simulations are performed to probe the anisotropic deformation in the compressions of face-centred-cubic metallic nanoparticles. In the elastic regime, the compressive load-depth behaviors can be characterized by the classical…
The yield surface in crystal plasticity can be approached from various directions during mechanical loading. We consider the competition between nanoindentation and tensile loading towards plastic yielding. For this purpose, we develop a…
Understanding deformation in polycrystalline metals is critical to use them in high-value high-risk applications. We present in-situ characterisation of plastic deformation of zirconium, a hexagonal closed packed (HCP), metal. Analysis of…
A literature review of studies investigating the topography of nano-indents in ion-implanted materials reveals seemingly inconsistent observations, with report of both pile-up and sink-in. This may be due to the crystallographic orientation…
Using molecular-dynamics simulation and finite-element modelling, we simulate nanoindentation into the three principal surfaces -- the (100), (110) and (111) surface -- of Cu and Al. In the elastic regime, the simulation data agree fairly…
We carry out strain-controlled in-situ compression experiments of micron-sized tungsten (W) micropillars in the temperature range 300-900 K, together with simulations of three-dimensional discrete dislocation dynamics (DDD) at the same…
Thermally-activated $\small{\nicefrac{1}{2}}<111>$ screw dislocation motion is the controlling plastic mechanism at low temperatures in body-centered cubic (bcc) crystals. Motion proceeds by the nucleation and propagation of atomic-sized…
Much scientific and practical interest is currently focused on the atomic-scale mechanical behaviors of metallic nanocrystals with different crystal structures at room temperature, while the high-temperature plastic deformation in tungsten…
When compressed, a metallic specimen will generally experience changes to its crystallographic texture due to plasticity-induced rotation. Ultrafast x-ray diffraction techniques make it possible to measure rotation of this kind in targets…
Tungsten carbide cobalt hardmetals are commonly used as cutting tools subject to high operation temperature and pressures, where the mechanical performance of the tungsten carbide phase affects the wear and lifetime of the material. In this…
The mechanical responses of single crystalline Body-Centered Cubic (BCC) metals, such as molybdenum (Mo), outperform other metals at high temperatures, so much so that they are considered as excellent candidates for applications under…
In this paper, we present an experimental study on plastic deformation and damage of polycrystalline pure Ti, as well as modeling of the observed behavior. From the mechanical characterization data, it can be concluded that the material…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
Understanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities.…
This work presents an open source, dislocation density based crystal plasticity modeling framework, $\rho$-CP. A Kocks-type thermally activated flow is used for accounting for the temperature and strain rate effects on the crystallographic…