相关论文: Ion-Beam-Sputtered Mid-Infrared Coatings for Hybri…
We present high-reflectivity substrate-transferred single-crystal GaAs/AlGaAs interference coatings at a center wavelength of 4.54 um with record-low excess optical loss below 10 parts per million. These high-performance mirrors are…
Substrate-transferred crystalline coatings have recently emerged as a groundbreaking new concept in optical interference coatings. Building upon our initial demonstration of this technology, we have now realized significant improvements in…
For trace gas sensing and precision spectroscopy, optical cavities incorporating low-loss mirrors are indispensable for path length and optical intensity enhancement. Optical interference coatings in the visible and near-infrared (NIR)…
Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive…
Mid-infrared (MIR) spectroscopy is a powerful technique employed for a variety of applications, including gas sensing, industrial inspection, astronomy, surveillance, and imaging. Thin-film narrowband interference filters, targeted to…
We theoretically investigate a new class of silicon waveguides for achieving Stimulated Brillouin Scattering (SBS) in the mid-infrared (MIR). The waveguide consists of a rectangular core supporting a low-loss optical mode, suspended in air…
We present the methods and results for broadband group delay dispersion measurements for all-monocrystalline and amorphous-crystalline hybrid supermirrors, as well as an all-amorphous mirror in the wavelength range from…
Immersed reflection gratings improve spectral resolving power by enabling diffraction within a high refractive index medium. This principle has been widely adopted to make grating spectrometers more compact. Conventional immersed gratings…
Using a custom-built scanning system, we generated maps of birefringence on reflection at $\lambda=1064$~nm from single-crystal GaAs/Al$_{0.92}$Ga$_{0.08}$As Bragg reflectors (henceforth ``AlGaAs coatings''). Ten coatings were bonded to…
Future laser-interferometric gravitational wave detectors (GWDs) will potentially employ test mass mirrors from crystalline silicon and a laser wavelength of $1550\,\rm{nm}$, which corresponds to a photon energy below the silicon bandgap.…
Highly reflective mirrors are indispensable components in a variety of state-of-the-art photonic devices. Typically used, bulky, multi-layered distributed Bragg (DBR) reflectors are limited to lattice-matched semiconductors or nonconductive…
Mid-infrared (mid-IR) spectroscopy is a crucial workhorse for a plethora of analytical applications and is suitable for diverse materials, including gases, polymers or biological tissue. However, this technologically significant wavelength…
We present our results for simultaneous measurement of the refractive indices of gallium arsenide (GaAs) and aluminum gallium arsenide (Al$_\mathrm{x}$Ga$_\mathrm{1-x}$As) from $2.0$ to $7.1\,\mathrm{\mu m}$ ($5000$ to…
The mid-infrared (MIR) spectral range is of immense use for civilian and military applications. The large number of vibrational absorption bands in this range can be used for gas sensing, process control and spectroscopy. In addition, there…
We present the novel design of microfabricated, silicon-substrate based mirrors for use in cryogenic Fabry-Perot Interferometers (FPIs) for the mid-IR to sub-mm/mm wavelength regime. One side of the silicon substrate will have a…
A novel approach to optics integration in ion traps is demonstrated based on a surface electrode ion trap that is microfabricated on top of a dielectric mirror. Additional optical losses due to fabrication are found to be as low as 80 ppm…
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop…
State-of-the-art Ni/Ti supermirror neutron optics have limited reflected intensity and a restricted neutron energy range due to the interface width. Incorporating low-neutron-absorbing 11B4C enhances reflectivity and allows for thinner…
The mid-infrared (mid-IR) is a strategically important band for numerous applications ranging from night vision to biochemical sensing. Unlike visible or near-infrared optical parts which are commonplace and economically available…
Infrared Reflection Absorption Spectroscopy (IRAS) on dielectric single crystals is challenging because the optimal incidence angles for light-adsorbate interaction coincide with regions of low IR reflectivity. Here, we introduce an…