相关论文: Mechanical characterization of pharmaceutical powd…
Milling of brittle materials shows a lower limit in size reduction, below which grinding cannot proceed further. Experimentally, the smallest particle size is determined by the milling media energy, and it is time-independent. Rittinger's…
The success of the various secondary operations involved in the production of particulate products depends on the production of particles with a desired size and shape from a previous primary operation such as crystallisation. This is…
Nano- and micromagnetic materials have been extensively employed in micro-functional devices. However, measuring small-scale mechanical and magnetomechanical properties is challenging, which restricts the design of new products and the…
The quality of powder layers, specifically their packing density and surface uniformity, is a critical factor influencing the quality of components produced by powder bed metal additive manufacturing (AM) processes, including selective…
We adopt a Quality by Design (QbD) paradigm to better control the mechanical properties of tablets. To this end, the effect of particle size distribution, lubricant concentration, and mixing time on the tensile strength and elastic modulus…
We propose a numerical tool to mimic the pulsed deposition of nanoparticles, a technique used to fabricate thin films from the deposition of nanoparticles upon a substrate. We employ such tool under different initial conditions, in…
A novel method to investigate the compaction behaviour of cohesive powders is presented. As a sample, a highly porous agglomerate formed by random ballistic deposition (RBD) of micron sized spherical particles is used. A nanomanipulator…
Comprehensive characterization of nanomaterials for medical applications is a challenging and complex task due to the multitude of parameters which need to be taken into consideration in a broad range of conditions. Routine methods such as…
Processes of mixing and segregation in a packed bed of granular material stirred by a periodically moving rectangular bar are simulated by the discrete element method (DEM). Influence of mechanical properties of the particle material…
The mechanical characteristics of a monolithic (non-porous) crystalline or amorphous material are described by a well-defined set of quantities. It is possible to change the mechanical properties by introducing porosity into this material:…
We study geometric and energetic factors that partake in modifying properties of polymeric melts via inserting well-dispersed nanoscopic particles (NP). Model systems are polybutadiene melts including 10-150 atom atomic clusters (0.1-1.5%…
The thermal and mechanical behaviors of powders are important for various additive manufacturing technologies. For powder bed fusion, capturing the temperature profile and the packing structure of the powders prior to melting is challenging…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
In the synthesis of metallic nanoparticles in microemulsions, we hypothesized that particle size is mainly controlled by the reaction rate. Thus, the changes observed on the particle sizes as reaction conditions, such as concentrations,…
In this paper, the grinding of powder inside a ball mill is studied using the Bonded Cell Method (BCM) implemented in the framework of Contact Dynamics. In BCM the parent particles are divided into cells that are glued to one another until,…
Bimodal cellular poly(methyl methacrylate) with micron and nano sized (300 to 500 nm) cells with up to 5 weight percent of sepiolite nanoparticles and porosity from 50 weight percent to 75 weight percent are produced by solid state foaming.…
Changes in the mechanical properties of granular materials, induced by variations in the intrinsic compressibility of the particles, are investigated by means of numerical simulations based on the combination of the Finite Element and…
This note presents a simulation method for investigating the relationship between porosity and particle size distribution in porous media characterization. The method simulates particle packing based on particle size distributions,…
The structure and mechanical properties of a simple two-dimensional model of a cohesive powder are investigated by molecular dynamics simulations. Micromechanical ingredients involve elasticity, friction, a short range attraction and,…
When considering grinding of minerals, scaling effect induces competition between plastic deformation and fracture in brittle solids. The competition can be sketched by a critical size of the material, which characterizes the…