相关论文: Quasi-continuous sub-$\mu$K strontium source witho…
We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized…
We demonstrate a continuous spectroscopy technique with frequency sensitivity well below the natural transition linewidth, while maintaining a locking range hundreds of times larger. The method exploits the position dependence of a…
We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are…
A frequency-stabilized light source emitting at 556 nm is realized by frequency-doubling a 1112-nm laser, which is phase-locked to a fiber-based optical frequency comb. The 1112-nm laser is either an ytterbium (Yb)-doped distributed…
Modern experiments in quantum metrology, sensing, and quantum computing require precise control of the state of atoms and molecules, achieved through the use of highly stable lasers and microwave generators with low phase noise. One of the…
A steady-state magneto-optical trap (MOT) of fermionic strontium atoms operating on the 7.5 kHz-wide ${^1\mathrm{S}_0} - {^3\mathrm{P}_1}$ transition is demonstrated. This MOT features $8.4 \times 10^{7}$ atoms, a loading rate of $1.3\times…
A fully stabilized soliton microcomb is critical for many applications of optical frequency comb based on microresonators. However, the current approaches for full frequency stabilization require either external acousto-optic or…
Low noise and high repetition rate optical frequency combs are desirable for many applications from timekeeping to precision spectroscopy. For example, gigahertz repetition rate sources greatly increase the acquisition speed of spectra in a…
In this paper, we present an experimental study of the metrological stabilization of a solid-state frequency comb for embedded metrology applications. The comb is a passively mode-locked laser diode based on InGaAs/InP Quantum-dash…
We report the frequency noise suppression of a 674nm diode laser by phase-locking it to a 1560nm cavity-stabilized laser, using a commercial optical frequency comb. By phase-locking the frequency comb to the narrow reference at telecom…
Optical frequency combs, coherent light sources that connect optical frequencies with microwave oscillations, have become the enabling tool for precision spectroscopy, optical clockwork and attosecond physics over the past decades. Current…
We describe frequency stabilization of a laser at 707.202 nm wavelength using FM spectroscopy in a hollow cathode lamp. The laser is stabilized to the $^{88}$Sr metastable $^3\mathrm{P}_2$ to $^3\mathrm{S}_1$ optical transition. The…
We demonstrate a frequency-stabilized, all-solid laser source at 589 nm with up to 800 mW output power. The laser relies on sum-frequency generation from two laser sources at 1064 nm and 1319 nm through a PPKTP crystal in a doubly-resonant…
Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency…
The repetition rate stabilization of an optical frequency comb based on diode-pumped solid-state laser technology is demonstrated using an intra-cavity electro-optic modulator. The large feedback bandwidth of such modulators allows…
A continuous guided atomic beam of $^{88}\mathrm{Sr}$ with a phase-space density exceeding $10^{-4}$ in the moving frame and a flux of $3 \times 10^{7} \, \mathrm{at \, s^{-1}}$ is demonstrated. This phase-space density is around three…
We demonstrate the use of a flexible digital servo system for the optical stabilization of both the repetition rate and carrier-envelope offset frequency of a laser frequency comb. The servo system is based entirely on a low-cost field…
We demonstrate a stable CMOS-compatible on-chip multiple-wavelength source by filtering and modulating individual lines from a frequency comb generated by a microring resonator optical parametric oscillator.. We show comb operation in a…
A fully stabilized mid-infrared optical frequency comb spanning from 2.9 to 3.4 um is described. The comb is based on half-harmonic generation in a femtosecond optical parametric oscillator, which transfers the high phase coherence of a…
An experimental method is developed for the robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from…