相关论文: Computational Discovery of Metastable NaMnO$_2$ Po…

We describe Na0.67Mn0.625Fe0.25Co0.125O2 (NMFCO), a P2-type sodium-ion battery cathode. Our composition, with significantly less Co than in an earlier study, shows discharge capacity close to 190 mAhg-1 and specific energy density exceeding…

The polyanionic compound Na2MnSiO4 is regarded as one of the promising cathode materials for Na-ion batteries due to good specific capacity with its attractive prospect of utilization of two electrons in the redox processes. So, in this…

Searching for efficient and high-performance cathode materials for rechargeable magnesium ion batteries (RMBs) is urgent for exploring sustainable energy technologies. However, the majority of cathode materials for RMBs usually suffer from…

Sodium-ion batteries have gained much interest over the past years and especially layered oxides are highly considered as cathodes for the next generation of batteries. However, there are still significant challenges to overcome in these…

Development of energy storage technologies that can exhibit higher energy densities, better safety, and lower supply-chain constraints than the current state-of-the-art Li-ion batteries (LIBs) is crucial for our transition into sustainable…

Developing high-performance cathode materials for magnesium-ion batteries (MIBs) remains challenging because Mg$^{2+}$ ions move slowly, and conventional materials exhibit low voltage outputs. In this study, machine learning and…

The search for sustainable, high-performance cathodes has driven a growing interest in sodium superionic conductor (NASICON)-type phosphates for sodium-ion batteries (SIBs). To identify promising NASICONs containing earth-abundant…

Cathode materials undergo various phase transitions during the charge/discharge process, and the structural transitions significantly affect the battery performance. Although phonon properties can provide a direct clue for structural…

Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur…

High-performance anodes for rechargeable Li-ion battery are produced by nanostructuring of the transition metal oxides on a conductive support. Here, we demonstrate a hybrid material of MnO2 directly grown onto fabrics of carbon nanotube…

We report the electrochemical investigation and study the diffusion kinetics of boron doped Na$_{0.66}$Mn$_{0.8}$Fe$_{0.2}$O$_{2}$ (B-NMFO) cathode materials for sodium-ion batteries. Notably, the B-NMFO cathode exhibits improved specific…

The cathode properties of Na2MTiO4 (M: transition-metal element) are investigated by means of density-functional-theory calculations. The stability between the layered structure and the disordered structure are focused in comparison with…

Multivalent batteries are an energy storage technology with the potential to surpass lithium-ion batteries, however their performance has been limited by the low voltages and poor solid-state ionic mobility of available cathodes. A…

We prepared Na$_x$TO$_2$ (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy…

Li2FeSiO4 is an important alternative cathode for next generation Li-ion batteries due to its high theoretical capacity (330 mA h/g). However, its development has faced significant challenges arising from structural complexity and poor…

We report the electrochemical sodium-ion kiinetics and distribution of relaxation time (DRT) analysis of a newly designed mixed polyanionic NaFe$_{1.6}$V$_{0.4}$(PO$_{4}$)(SO$_{4}$)$_{2}$@CNT composite as a cathode. The specific capacity of…

We report the electrochemical performance and diffusion kinetics of a newly designed NASICON type Na$_{3.3}$Mn$_{1.2}$Ti$_{0.75}$Mo$_{0.05}$(PO$_4$)$_3$/C composite material as a cathode for cost-effective sodium-ion batteries. A novel…

Na-ion batteries (NIBs), which are recognized as a next-generation alternative technology for energy storage, still suffer from commercialization constraints due to the lack of low-cost, high-performance cathode materials. Since our first…

Layered Li(Ni,Mn,Co,)O$_2$ (NMC) presents an intriguing ternary alloy design space for optimization as a cathode material in Li-ion batteries. Recently, the high cost and resource limitations of Co have added a new design constraint and…

The identification of alternatives to the Lithium-ion battery architecture remains a crucial priority in the diversification of energy storage technologies. Accompanied by the low reduction potential of $\mathrm{Ca^{2+}/Ca}$, -2.87 V vs.…