相关论文: In-situ compression and shape recovery of Ceramic …
Shape memory (SM) ceramics, such as yttria-stabilized tetragonal zirconia (YSTZ), are a unique family of SM materials that offer unique properties including ultra-high operating temperature, and high resistance to chemical corrosion and…
Ceramics are typically brittle at ambient conditions due to their covalent or ionic bonding and limited dislocation activities. While plasticity, and occasionally superplasticity, can be achieved in ceramics at high temperatures through…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
Developing nanostructured bulk ceramics is a major challenge when conventional high-temperature sintering is employed for consolidation. In the current investigation, yttria-stabilized zirconia (YSZ) with a composition of ZrO2 - 3 mol% Y2O3…
The results of dynamic strength tests of the alumina ceramics with various grain sizes are presented. The ceramics were obtained by Spark Plasma Sintering (SPS) of industrial submicron and fine Al2O3 powders. The heating up was performed…
An elastic-visco-plastic thermomechanical model for the simulation of cold forming and subsequent sintering of ceramic powders is introduced and based on micromechanical modelling of the compaction process of granulates. Micromechanics…
The development of damage-resistant structural materials that can withstand harsh environments is a major issue in materials science and engineering. Bioinspired brick-and-mortar designs have recently demonstrated a range of interesting…
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it…
The coexistence of multiple structural phases and field induced short-range to long-range order transition in ferroelectric materials, leads to a strong electrocaloric effect (ECE) and electrical energy storage density (Wrec) in the…
Based on the traditional polycrystalline ferroelectric Ba0.85Ca0.15Zr0.10Ti0.90O3, the 0.4 Ba0.85Ca0.15Zr0.10Ti0.90O3 0.6 Ba0.9Sr0.1Ti0.9Sn0.1O3 medium entropy material with good energy storage and electrocaloric effect performances is…
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain…
We report on the experimental observation of selective delamination of semi-transparent materials on the example of yttria-stabilized zirconia ceramics upon femtosecond laser processing of its surface with low numerical aperture lens. The…
Specimen- and grain-size effects on nanoscale plastic deformation mechanisms and mechanical properties of polycrystalline yttria-stabilized tetragonal zirconia (YSTZ) nanopillars are studied by molecular dynamics simulations. Through…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
NdFeO3 modified polycrystalline ceramics with composition (NdFeO3)0.1-(Ba0.7Sr0.3TiO3)0.9 (NFBST) ceramics have been synthesized via solid-state reaction route. The Rietveld refinement of the XRD data confirmed the existence of a tetragonal…
Zirconia ceramics have been known as a structural material with high fracture toughness and strength since Garvie et al. discovered phase transformation toughening in 1975 [1]. Although these mechanical properties are the most excellent…
Microstrctural, vibrational, ferroelectric and dielectric properties investigation reveals non-stoichiometric chemical ordered regions (CORs) and relaxor like dielectric characteristics in lead magnesium niobate (PMN) ceramics uniaxially…
Yttria stabilized Zirconia (YSZ) pellets with different crystallite sizes were irradiated with 80 MeV Ag$^{6+}$ ions at room temperature and 1000 K to understand the role of crystallite size/material microstructure and irradiation…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…
The effect of sintering regimes on the density, microstructure parameters, and mechanical properties of Al2O3 and Al2O3 + 0.25%MgO ceramics has been investigated. The ceramics were sintered in three regimes: Regime I - heating at a constant…