相关论文: Phase-Center-Constrained Beamforming for Minimizin…
Hybrid beamforming (HBF) transceiver architectures based on frequency-independent phase shifters (PS-HBF) are sensitive to the phases and physical directions with limited capability to compensate for the detrimental effects of the beam…
In this paper, we propose an integrated sensing and communication (ISAC) system enabled by movable antennas (MAs), which can dynamically adjust antenna positions to enhance both sensing and communication performance for future wireless…
Due to the heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a…
Broadband beamforming is a technique to obtain the signal with a wide range of frequencies. It maintains the signal integrity and spatial selectivity over frequencies. This is important in several applications such as microphone array,…
The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume…
In dynamic acoustic environments characterized by time-varying interferers and moving sources, effective beamforming requires accurately identifying stationary regions over time. Traditional Capon beamformers rely on the instantaneous…
The line-of-sight dominant air-ground channels have posed critical interference issues in cellular-connected unmanned aerial vehicle (UAV) communications. In this paper, we propose a new base station (BS) cooperative beamforming (CB)…
This paper proposes an asymptotically optimal hybrid beamforming solution for large antenna arrays by exploiting the properties of the singular vectors of the channel matrix. It is shown that the elements of the channel matrix with Rayleigh…
The incorporation of subarrays in Direct Radiating Arrays for satellite missions is fundamental in reducing the number of Radio Frequency chains, which correspondingly diminishes cost, power consumption, space, and mass. Despite the…
In millimeter-wave communications, multiple-input-multiple-output (MIMO) systems use large antenna arrays to achieve high gain and spectral efficiency. These massive MIMO systems employ hybrid beamformers to reduce power consumption…
This paper studies the coordinated beamforming (CoBF) design for the multiple-input single-output interference channel, provided that only channel distribution information is known to the transmitters. The problem under consideration is a…
One key feature of massive multiple-input multiple-output systems is the large number of antennas and users. As a result, reducing the computational complexity of beamforming design becomes imperative. To this end, the goal of this paper is…
Seismic noise with an amplitude higher than that of the sought signal is a challenge for detection. Several techniques have been developed to suppress the ambient noise and to reduce the detection threshold in order to find signals with the…
Integrated sensing and communication (ISAC) is a promising solution for the future sixth-generation (6G) system. However, classical fixed-position antenna (FPA) ISAC systems fail to fully utilize spatial degrees of freedom (DoFs), resulting…
Movable antennas (MAs) are a promising paradigm to enhance the spatial degrees of freedom of conventional multi-antenna systems by flexibly adapting the positions of the antenna elements within a given transmit area. In this paper, we model…
A simple method is proposed for use in a scenario involving a single-antenna source node communicating with a destination node that is equipped with two antennas via multiple single-antenna relay nodes, where each relay is subject to an…
Beamforming is traditionally associated with coherent summation of signals from antenna elements of the same polarization, here referred to as single polarization beamforming (SPBF). In this paper we focus on a new method, called dual…
This paper studies a multi-target multi-user integrated sensing and communication (ISAC) system where a multi-antenna base station (BS) communicates with multiple single-antenna users in the downlink and senses the unknown and random angle…
Hybrid beamforming is a promising technology to improve the energy efficiency of massive MIMO systems. In particular, subarray hybrid beamforming can further decrease power consumption by reducing the number of phase-shifters. However,…
This paper addresses a drawback of massive multiple-input multiple-output Maximum Ratio Transmission beamforming. In some propagation conditions, when the base station serves the same target user equipment for a long period, it reduces the…