相关论文: Revisiting Beamforming Design for Stable Millimete…

Communication systems at millimeter-wave (mmW) and sub-terahertz frequencies are of increasing interest for future high-data rate networks. One critical challenge faced by phased array systems at these high frequencies is the efficiency of…

Hybrid analog and digital beamforming has emerged as a key enabling technology for millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication systems since it can balance the trade-off between system performance…

Millimeter wave (mmWave) communication with large array gains is a key ingredient of next generation (5G) wireless networks. Effective communication in mmWaves usually depends on the knowledge of the channel. We refer to the problem of…

This paper investigates the design of analog beamforming at the receiver in millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems, aided by full digital chains featuring 1-bit ADCs. We advocate utilizing these full digital…

For high-speed train (HST) millimeter wave (mmWave) communications, the use of narrow beams with small beam coverage needs frequent beam switching, while wider beams with small beam gain leads to weaker mmWave signal strength. In this…

The merge of mobile edge computing (MEC) and millimeter-wave (mmWave) communications will hopefully enable the fast access for computational resources, where these two technologies can benefit from each other's potentials. However, the high…

Establishing and maintaining millimeter-wave (mmWave) links is challenging due to the changing environment and the high sensibility of mmWave signal to user mobility and channel conditions. MmWave link configuration problems often involve a…

Millimeter wave (mmWave) communication, utilizing beamforming techniques to address the inherent path loss limitation, is considered as one of the key technologies to support ever increasing high throughput and low latency demands of…

Wireless backhaul communication has been recently realized with large antennas operating in the millimeter wave (mmWave) frequency band and implementing highly directional beamforming. In this paper, we focus on the alignment problem of…

The joint design of analog beamforming and power allocation is investigated for a single radio-frequency chain multiuser time-division multiple access system under a max-min signal-to-noise ratio (SNR) criterion. A hardware-efficient…

The use of millimeter wave (mmWave) spectrum for commercial wireless communications is expected to offer data rates in the order of Gigabits-per-second, thus able to support future applications such as Vehicle-to-Vehicle or…

Beamforming is a signal processing technique where an array of antenna elements can be steered to transmit and receive radio signals in a specific direction. The usage of millimeter wave (mmWave) frequencies and multiple input multiple…

We consider the problem of spatial signal design for multipath-assisted mmWave positioning under limited prior knowledge on the user's location and clock bias. We propose an optimal robust design and, based on the low-dimensional precoder…

Beamforming techniques are considered as essential parts to compensate severe path losses in millimeter-wave (mmWave) communications. In particular, these techniques adopt large antenna arrays and formulate narrow beams to obtain…

mm-Wave communication employs directional beams to overcome high path loss. High data rate communication is typically along line-of-sight (LoS). In outdoor environments, such communication is susceptible to temporary blockage by pedestrians…

Beamforming techniques have been widely used in the millimeter wave (mmWave) bands to mitigate the path loss of mmWave radio links as the narrow straight beams by directionally concentrating the signal energy. However, traditional mmWave…

Multicast transmissions have been widely analyzed in traditional networks as a way to improve spectrum efficiency when multiple users are interested in the same data. However, their application to mmWave communications has been studied only…

Fifth generation wireless systems are expected to employ multiple antenna communication at millimeter wave (mmWave) frequencies using small cells within heterogeneous cellular networks. The high path loss of mmWave as well as physical…

Millimeter-wave (mmWave) communications is considered as a key enabler towards the realization of next-generation wireless networks, due to the abundance of available spectrum at mmWave frequencies. However, mmWave suffers from high…

Millimeter-wave (mmWave) hybrid analog-digital beamforming is a promising approach to satisfy the low-latency constraint in multiple unmanned aerial vehicles (UAVs) systems, which serve as network infrastructure for flexible deployment.…