相关论文: Direct numerical simulation benchmarks for the pre…
The spatio-temporal aspects of the transition to turbulence are considered in the case of a boundary layer flow developing above a flat plate exposed to free-stream turbulence. Combining results on the receptivity to free-stream turbulence…
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly…
We present the results of a Direct Numerical Simulation of a particle-laden spatially developing turbulent boundary layer up to Re{\theta} = 2500. Two main features differentiate the behavior of inertial particles in a zero-…
Direct numerical simulations are conducted to study the receptivity and transition mechanisms in a solitary wave boundary layer developing over randomly organized wave-like bottom topography. The boundary layer flow shows a selective…
The turbulent boundary layer over a flat plate is computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations as a test bed for a synthetic turbulence generator (STG) inflow boundary condition. The inlet…
The objective of this work is to investigate the unexplored laminar-to-turbulent transition of a heated flat-plate boundary layer with a fluid at supercritical pressure. Two temperature ranges are considered: a subcritical case, where the…
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the…
In a turbulent boundary layer over a smooth flat plate with zero pressure gradient, the intermediate structure between the viscous sublayer and the free stream consists of two layers: one adjacent to the viscous sublayer and one adjacent to…
We present direct numerical simulations (DNSs) of bypass transition over a flat plate with inlet freestream turbulence intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. A new definition of the transition intermittency is…
The turbulent/non-turbulent interface is analysed in a direct numerical simulation of a boundary layer in the range $Re_\theta=2800-6600$, with emphasis on the behaviour of the relatively large-scale fractal intermittent region. This…
A bypass transition scenario in a wind-stress driven aqueous flow is analysed using a temporally developing boundary layer model with accelerating surface drift velocity. The parameters of the model are selected to mimic a wave-tank…
Experiments were conducted to investigate characteristics of turbulent spots formed in transitional boundary layers developed over a flat plate and an axisymmetric cone placed in similar hypersonic freestream environment of Mach number…
Turbulent heat and freshwater transport at ice-ocean interfaces controls glacier and iceberg melt rates, yet the underlying physics remains poorly constrained. Parameterizations that assume shear boundary layer scaling are commonly used,…
We present direct numerical simulation results of turbulent open channel flow at bulk Reynolds numbers up to 12000, coupled with (passive) scalar transport at Schmidt numbers up to 200. Care is taken to capture the very large scale motions…
The turbulent boundary layer over a Gaussian shaped bump is computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations. The two-dimensional bump causes a series of strong pressure gradients alternating in…
A pair of Direct Numerical Simulations is used to investigate curvature and pressure effects. One has a Gaussian test bump and a straight opposite wall, while the other has a straight test wall and a blowing/suction distribution on an…
We investigate the controlled K-type breakdown of a flat-plate boundary-layer with highly non-ideal supercritical fluid at a reduced pressure of $p_{r,\infty}=1.10$. Direct numerical simulations are performed at a Mach number of…
The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast…
The dynamics of a shock wave impinging on a transitional high-enthalpy boundary layer out of thermochemical equilibrium is investigated for the first time by means of a direct numerical simulation. The freestream Mach number is equal to 9…
High-speed boundary-layer transition is extremely sensitive to the free-stream disturbances which are often uncertain. This uncertainty compromises predictions of models and simulations. To enhance the fidelity of simulations, we directly…