相关论文: A 3D Printed Quad-Ridged Flared Horn Antenna Feede…
The revolution that wireless communication is suffering during the last decades has increased the need for antennas where performances such as lightweight, rapid manufacturing and portability run in parallel with their electric performance.…
This article presents a fully 3D-printed wideband metasurface folded reflectarray antenna (MFRA) operating in the millimeter-wave n257 band. The proposed MFRA integrates a novel polarization-rotating reflective metasurface (RMS), a compact…
We have developed, built, and tested a new feed design for interferometric radio telescopes with "large-$N$, small-$D$" designs. Those arrays require low-cost and low-complexity feeds for mass production on reasonable timescales and…
In this letter, a single-layer dual-band flexible conformal filtering endfire antenna is presented. The proposed antenna is based on two co-designed folded dipoles (FDs) working at two frequencies, where the lower-frequency FD acts as a…
We present the design, manufacturing technique, and characterization of a 3D-printed broadband graded index millimeter wave absorber. The absorber is additively manufactured using a fused filament fabrication (FFF) 3D printer out of a…
A wide bandwidth, dual polarized, modified four-square antenna is presented as a feed antenna for radio astronomical measurements. A linear array of these antennas is used as a line-feed for cylindrical reflectors for Tianlai, a radio…
Modern communication systems will require antennas with adaptive functionality which are able to modify their performance based on the requirements of the channel. For example, mobile ad-hoc networks need directive antennas that are able to…
The paper introduces a novel dual-port dual-polarized magneto-electric dipole (MED) antenna with orthogonal Gamma and inverted-Gamma shape probes, which was fabricated by means of an additive 3D metal printing process. Electromagnetic wave…
A novel miniaturized printed folded dipole antenna has been designed for narrowband sensing applications. It is shown that the antenna may be systematically engineered to achieve matching to a practical source impedance at frequencies well…
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall.…
This letter presents the first experimental results of our three-dimensional (3D) millimeter-wave (mm-wave) Compressive-Reflector-Antenna (CRA) imaging system. In this prototype, the CRA is 3D-printed and coated with a metallic spray to…
We present the electromagnetic model of a dual circular polarization antenna-feed system, consisting of a corrugated feedhorn, a polarizer and an orthomode transducer. This model was developed for the passive front-end implemented in the…
This paper presents a novel physically consistent analytical model for two-dimensional (2D) waveguide-fed metasurface antennas that is based on the discrete dipole approximation. The proposed framework extends previous works deriving…
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency…
Additive manufacturing paves new ways to an efficient exploration of the third space dimension, providing advantages over conventional planar architectures. In particular, volumetric electromagnetic antennas can demonstrate superior…
This paper describes the design of a 5.5:1 bandwidth feed antenna and reflector system, intended for use in hydrogen intensity mapping experiments. The system is optimized to reduce systematic effects that can arise in these experiments…
We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable…
We present the design and performance of a 2x2 prototype array of corrugated feed-horns in W-band. The module is fabricated using a so-called "platelet" technique by milling Aluminum plates. This technique is suitable for low-cost and…
The given work is devoted to the modern developments in the field of radio astronomy instrumentation. In particular, the sensitivity of the multi-beam reflector radio telescope which is fed by phased array (PAF) is considered. Using PAF as…
In this letter, a dual port antenna with polarization adjustability is proposed. The loading effect of four ring slots stimulates a hybrid mode in the antenna that generates eight magnetic monopoles with high gain in boresight. Due to…