相关论文: A 2-bit Wideband 5G mm-Wave RIS with Low Side Lobe…

Despite the growing interest in reconfigurable intelligent surfaces (RISs) for millimeter-wave (mm-wave) bands, and the considerable theoretical work reported by the communication community, there is a limited number of published works…

Reconfigurable Intelligent Surfaces enable active control of wireless propagation channels, which is crucial for future 5G and 6G networks. This work presents a scalable RIS design operating at 3.6 GHz with both 1 bit and 3 bit phase…

Reconfigurable Intelligent Surfaces (RISs) exhibit promising enhancements in coverage and data rates for wireless communication systems, particularly in the context of 5G and beyond. This paper introduces a novel approach by focusing on the…

In this paper, a broadband 1-bit coding metasurface-based reconfigurable intelligent surface (RIS) is presented. The unit cell of the metasurface consists of a wide dipole modified with interdigital capacitors and loaded with an SMP…

Reconfigurable intelligent surfaces (RISs) have promising coverage and data rate gains for wireless communication systems in 5G and beyond. Prior work has mainly focused on analyzing the performance of these surfaces using computer…

In this paper, we propose a two-bit reconfigurable intelligent surface (RIS)-aided communication system, which mainly consists of a two-bit RIS, a transmitter and a receiver. A corresponding prototype verification system is designed to…

One of the key enablers of future wireless communications is constituted by massive multiple-input multiple-output (MIMO) systems, which can improve the spectral efficiency by orders of magnitude. However, in existing massive MIMO systems,…

5G radio at millimeter wave (mmWave) and beyond 5G concepts at 0.1-1 THz can exploit angle and delay measurements for localization, by the virtue of increased bandwidth and large antenna arrays but are limited in terms of blockage caused by…

A novel dual-band reconfigurable intelligent surface (DBI-RIS) design that combines the functionalities of millimeter-wave (mmWave) and sub-6 GHz bands within a single aperture is proposed. This design aims to bridge the gap between current…

Reconfigurable intelligent surfaces (RIS) have emerged as a transformative technology for electromagnetic (EM) wave manipulation, offering unprecedented control over wave reflections compared to traditional metallic reflectors. By utilizing…

This paper presents a 1-bit reconfigurable intelligent surface (RIS) fabricated using a three-layer structure. It employs a manual layer stackup incorporating an optimal air gap to reduce the effective dielectric losses while using a…

Reconfigurable intelligent surfaces (RISs) enable reliable low-latency millimeter wave (mmWave) communication links in cases of a blocked line-of-sight (LoS) between the base station (BS) and the user equipment (UE), i.e. a RIS mounted on a…

This paper presents a multi-bit reconfigurable intelligent surface (RIS) with a high phase resolution, capable of beam-steering in the azimuthal plane at sub-6 Gigahertz (GHz). Field trials in realistic indoor deployments have been carried…

This letter presents a novel Reconfigurable Intelligent Surface (RIS) that features a low-profile structure, wide operating bandwidth, and continuous phase control. By incorporating a middle patch layer without introducing an additional air…

Reconfigurable Intelligent Surfaces (RISs) can redirect electromagnetic waves to desired directions to enhance signal coverage and/or improve signal-to-noise ratio (SNR) at the user equipment (UE). We present the design, implementation, and…

Reconfigurable Intelligent Surfaces (RIS) have been identified as a potential ingredient to enhance the performance of contemporary wireless communication and sensing systems. Yet, most of the existing devices are either costly or not…

Reconfigurable intelligent surfaces have emerged as a promising hardware platform for shaping wireless propagation environments at millimeter-wave (mm-Wave) frequencies and beyond. While many existing studies emphasize channel modeling and…

In millimeter-wave (mmWave) cellular systems, reconfigurable intelligent surfaces (RISs) are foreseeably deployed with a large number of reflecting elements to achieve high beamforming gains. The large-sized RIS will make radio links fall…

Reconfigurable intelligent surfaces (RISs) are emerging as key enablers of reliable industrial automation in the millimeter-wave (mmWave) band, particularly in environments with frequent line-of-sight (LoS) blockage. While prior works have…

The rising concept of reconfigurable intelligent surface (RIS) has promising potential for Beyond 5G localization applications. We herein investigate different phase profile designs at a reflective RIS, which enable non-line-of-sight…