相关论文: Localised stress and strain distribution in slidin…
By modifying and extending recent ideas [C. Seoanez et al., Europhys. Lett. 78, 60002 (2007)], a theoretical framework to describe dissipation processes in the surfaces of vibrating micro- and nanoelectromechanical devices, thought to be…
The quasistatic rate-independent damage combined with linearized plasticity with hardening at small strains is investigated. The fractional-step time discretisation is devised with the purpose to obtain a numerically efficient scheme…
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a…
Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical fitting parameters, which range several orders of magnitude. Major advances in tribology have recently been…
The wear-driven structural evolution of nanocrystalline Cu was simulated with molecular dynamics under constant normal loads, followed by a quantitative analysis. While the microstructure far away from the sliding contact remains unchanged,…
This paper examines friction as a function of the sliding velocity and applied normal load from air to UHV in a scanning force microscope (SFM) experiment in which a sharp silicon tip slides against a flat Si(100) sample. Under ambient…
In the presented research, the intergranular elastic interaction and the second-order plastic incompatibility stress in textured ferritic and austenitic steels were investigated by means of diffraction. The lattice strains were measured…
Surface temperature is among crucial factors, which control wear during sliding dry contact. Using computer modeling, we study the possibility to achieve close to zero rate of surface wear during sliding friction of the special type of…
A stochastic discrete slip approach is proposed to model plastic deformation in submicron domains. The model is applied to the study of submicron pillar ($D~\leq~1\mu m$) compression experiments on tungsten (W), a prototypical metal for…
Plastic deformation of micron-scale crystalline materials differ considerably from bulk ones, because it is characterized by random strain bursts. To obtain a detailed picture about this stochastic phenomenon, micron sized pillars have been…
Contact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al.…
Micron-scale single crystalline materials deform plastically via large intermittent strain bursts that make the deformation process unpredictable. Here we investigate this stochastic phenomenon by analysing the plastic response of an…
The present paper is devoted to a theoretical analysis of sliding friction under the influence of oscillations perpendicular to the sliding plane. In contrast to previous works we analyze the influence of the stiffness of the tribological…
We investigate the sliding strength of thin filaments in frictional contact with a translating cylinder, perpendicular to the filaments' axes, in knotted (clove hitch) and unknotted (capstan) configurations. Recent work reported superlinear…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
Size-dependence of plastic flow is studied by discrete dislocation dynamical simulation of systems with various numbers of interacting linear edge dislocations while the stress is slowly increased. Regions between avalanches in the…
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and…
A reduced order asymptotic homogenization based multiscale technique which can capture damage and inelastic effects in composite materials is proposed. This technique is based on two scale homogenization procedure where eigen strain…
When two solids start rubbing together, frictional sliding initiates in the wake of slip fronts propagating along their surfaces in contact. This macroscopic rupture dynamics can be successfully mapped on the elastodynamics of a moving…
The understanding of tribo- and electro-chemical phenomenons on the molecular level at a sliding interface is a field of growing interest. Fundamental chemical and physical insights of sliding surfaces are crucial for understanding wear at…