相关论文: Conjugate Heat Transfer Effects on Bubble Growth D…
This article presents a computational study of saturated flow boiling in non-circular microchannels. The unit channel of a multi-microchannel evaporator, consisting of the fluidic channel and surrounding evaporator walls, is emulated and…
Flow boiling within microchannels is an efficient heat removal mechanism by utilizing the latent heat of the fluid. Numerical simulations can resolve the small temporal and spatial scales of the vapor bubbles in the flow boiling process,…
In the present study, a 1-dimensional model is proposed to estimate the pressure drop and heat transfer coefficient for flow boiling in a rectangular microchannel. The present work takes into account the pressure fluctuations caused due to…
The present article discusses the impact of liquid coolant subcooling on multiphase fluid flow and boiling heat transfer in porous media with internal heat generation. Although extremely relevant and important, only limited studies are…
The evaporation of vapor bubbles inside a microchannel is important to realize a device with high cooling performance. The liquid film formed on the solid surface is essential for evaporative heat transfer from solid to fluid; its formation…
Liquid-infused surfaces (LIS) can reduce friction drag in both laminar and turbulent flows. However, the heat transfer properties of such multi-phase surfaces have still not been investigated to a large extent. We use numerical simulations…
The field trap effect on the microcavity surface under the action of an electric field is not conducive to boiling heat transfer. This numerical study found that using conducting-insulating microcavity surfaces in an electric field removes…
This study investigates the effect of compliant walls on the turbulent heat transfer in channel flows over viscous-hyperelastic walls. We perform Direct Numerical Simulations, fully resolving the mutual fluid-structure interactions between…
Results of direct numerical simulations (DNS) of porous-wall turbulent flows in open channels with conjugate heat transfer are reported in this work. For the conductive porous walls considered here, the change in heat transfer is not…
In this paper, the energy non-conservation problem of the hybrid thermal LB phase change model is emphasized. To solve this problem, an infinite volume discrete scheme is introduced to deal with the diffusion term in the energy equation.…
Microchannels have increasingly been used to miniaturize heat transfer equipment, improve energy efficiency, and minimize heat transfer fluid inventory. A fundamental understanding of condensation in microscale will yield far-reaching…
Boiling is an extremely effective way to promote heat transfer from a hot surface to a liquid due to several mechanisms many of which are not understood in quantitative detail. An important component of the overall process is that the…
Boiling is a very efficient way to transfer heat from a heater to the liquid carrier. We discuss the boiling crisis, a transition between two regimes of boiling: nucleate and film boiling. The boiling crisis results in a sharp decrease in…
Microfluidics technology offers high efficiency of heat and mass transfer and low safety hazards compared to conventional multiphase processes. The multiphase flow in the microchannels is usually characterized as Taylor flow that includes…
Bubble growth, departure and sliding in low-pressure flow boiling has received considerable attention in the past. However, most applications of boiling heat transfer rely on high-pressure flow boiling, for which very little is known, as…
Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the…
Pool boiling is one of the efficient ways to remove heat from high-power electronics, heat exchangers, and nuclear reactors. Nowadays, the pool boiling method is tried to exercise frequently due to its ability to remove high heat flux…
A theoretical model is developed for the forced convection film boiling phenomenon over a heated sphere moving vertically downwards in the water. Unprecedented to the previous analytical studies, this model accounts for the buoyancy effects…
The heat transfer mechanism in Rayleigh-Benard convection in a liquid with a mean temperature close to its boiling point is studied through numerical simulations with point-like vapor bubbles, which are allowed to grow or shrink through…
Heat transfer to a granular flow is comprised of two resistances in series: near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective…