相关论文: Heterogeneous dynamic restoration of Ti-15Mo alloy…

We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…

Controlled mechanical loading was applied to Ti-15Mo alloy during annealing at 550 $^\circ$C. Massive formation of the $\omega_{\textrm{iso}}$ phase from the parent $\beta$-phase occurred during annealing at 550 $^\circ$C without external…

The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…

We provide a critical atomistic evidence of pseudoelastic behavior in complex solid-solution BCC Mo-W-Ta-Ti-Zr alloy. Prior to this work, only limited single-crystal BCC solids of pure metals and quaternary alloys have shown pseudoelastic…

The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn {\alpha}-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only…

A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…

The cyclic deformation behavior of extruded Mg-8.5wt.%Al alloy with a conventional extrusion texture and a modified texture is systematically investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC)…

Aerospace structures often experience high strain rate events such as ballistic impact, crash, or crush. A material model has been developed that enhances the capability to simulate the dynamic response of composite materials under these…

The microstructural mechanisms governing energy storage during plastic deformation of twinning-induced plasticity (TWIP) steels remain insufficiently understood, particularly under conditions of strain localization. This study provides a…

A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…

High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to…

Correlated analysis of (sub)grains and particles in alloys is important to understand transformation processes and control material properties. A multimodal data fusion workflow directly combining subgrain data from electron backscatter…

Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…

Slow dynamic nonlinearity is widely observed in brittle materials with complex heterogeneous or cracked microstructures. It is seen in rocks, concrete and cracked glass blocks. Unconsolidated structures show the behavior as well: aggregates…

The microstructure and mechanical properties of materials saturate to steady states after severe plastic deformation (SPD). Despite the well-known effect of temperature on the steady-state microstructure, there is no general agreement on…

Single-phase, multi-elements (three or more) with high concentrations show exceptional tensile strength up to ~ 0.8-1.2 GPa. However, they possess a very low 0.2% yield strength (YS), i.e., they can be permanently deformed at very…

A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely…

Hydrogen storage remains a key challenge for the development of a sustainable hydrogen energy system, where materials must satisfy requirements on storage capacity, thermodynamics, kinetics, and reversibility. Complex borohydrides are…

Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $\alpha$/$\beta$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based…

Plastic flow behavior of low carbon steel has been studied at room temperature during tensile deformation by varying the initial strain rate of 3.3x10e-4 1/sec to the final strain rate ranging from 1.33x10e-3 1/sec to 2.0x10e-3 1/sec at a…