相关论文: Capacity and Power Consumption of Multi-Layer 6G N…

This article presents a data-driven system-level analysis of multi-layer 6G networks operating in the upper mid-band (FR3: 7-24 GHz). Unlike most prior studies based on 3rd Generation Partnership Project (3GPP) templates, we leverage…

Driven by the pursuit of gigabit-per-second data speeds for future 6G mobile networks, in addition to the support of sensing and artificial intelligence applications, the industry is expanding beyond crowded sub-6 GHz bands with innovative…

As 6G networks evolve, the upper mid-band spectrum (7 GHz to 24 GHz), or frequency range 3 (FR3), is emerging as a promising balance between the coverage offered by sub-6 GHz bands and the high-capacity of millimeter wave (mmWave)…

Increasing attention is given to the upper mid-band or Frequency Range 3 (FR3), from 7 to 24 GHz, in the research towards sixth-generation (6G) networks. Promises of offering large data rates at favorable propagation conditions are leading…

The initial 6G networks will likely operate in the upper mid-band (7-24 GHz), which has decent propagation conditions but underwhelming new spectrum availability. In this paper, we explore whether we can anyway reach the ambitious 6G…

Motivated by increasing wireless capacity demands and 6G advancements, the newly defined Frequency Range 3 (FR3, 7.125-24.25 GHz), also known as the upper mid-band, has emerged as a promising spectrum candidate. It offers a balance between…

The sixth generation (6G) wireless communication nowadays is seeking a new spectrum to inherit the pros and discard the cons of sub-6 GHz, millimeter-wave (mmWave), and sub-terahertz (THz) bands. To this end, an upper mid-band with a…

The upper midband, spanning 7 to 24 GHz, strikes a good balance between large bandwidths and favorable propagation environments for future 6th Generation (6G) networks. Wireless networks in the upper midband, however, will need to share the…

Driven by the escalating demand for wireless capacity and advancements in 6G research, the new Frequency Range 3 (FR3) referred to upper mid-band (7.125-24.25 GHz) has emerged as a highly compelling spectrum candidate. This range offers a…

The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable…

The research community has already identified that, by 2030, 5G networks will reach the capacity limits, and hence, will be inadequate to support next generation bandwidth-hungry, ubiquitous, intelligent services, and applications.…

In cellular systems using frequency division duplex, growing Internet services cause unbalance of uplink and downlink traffic, resulting in poor uplink spectrum utilization. Addressing this issue, this paper considers overlaying an ad hoc…

FR3 ($\approx$7-24 GHz), also referred to as the upper mid-band, has recently emerged as promising spectrum for 6G; however, its propagation and MIMO characteristics vary significantly with frequency and environment, and spectrum…

Todays heterogeneous networks comprised of mostly macrocells and indoor small cells will not be able to meet the upcoming traffic demands. Indeed, it is forecasted that at least a 100x network capacity increase will be required to meet the…

Boosting data rates in LTE mobile networks is one of the key features of LTE-Advanced. This improved user experience is achieved by Carrier Aggregation (CA), in which the available spectrum of an operator is bundled out of several frequency…

The emergence of 6G networks enables simultaneous near-field and far-field communications through extremely large antenna arrays and high carrier frequencies. While these regimes enhance spatial multiplexing and link capacity, their…

The new mid-band (6-24 GHz) has attracted significant attention from both academia and industry, which is the spectrum with continuous bandwidth that combines the coverage benefits of low frequency with the capacity advantages of high…

As discussions around 6G begin, it is important to carefully quantify the spectral efficiency gains actually realized by deployed 5G networks as compared to 4G through various enhancements such as higher modulation, beamforming, and MIMO.…

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral…

With the push toward 6G commercialization, Frequency Range 3 (FR3) bands, specifically 7.125-8.4 GHz and 14.8-15.3 GHz, have become focal points for achieving wide-area, high-capacity coverage. However, practical deployment is often limited…