相关论文: Preserving Surface Strain in Nanocatalysts via Mor…
Surface stresses, in nano-sized anode particles undergoing chemomechanical interactions, have a relaxing effect on the diffusion-induced stresses thus improving the mechanical endurance of the particles, whereas, the compressive effect of…
Materials that can produce large controllable strains are widely used in shape memory devices, actuators and sensors. Great efforts have been made to improve the strain outputs of various material systems. Among them, ferroelastic…
Nanopowder consolidation under high strain rate shock compression is a potential method for synthesizing and processing bulk nanomaterials. A thorough investigation of the shock deformation of powder materials is of great engineering…
The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. In this work, we moderate the surface anchoring against the bulk elasticity of liquid crystals to dynamically shape…
A phase-field model is used to capture the surfactant-driven formation of fracture patterns in particulate monolayers. The model is intended for the regime of closely-packed systems in which the mechanical response of the monolayer can be…
The imaging of active nanoparticles represents a milestone in decoding heterogeneous catalysts dynamics. We report the facet resolved, surface strain state of a single PtRh alloy nanoparticle on SrTiO3 determined by coherent x-ray…
Nanowires play a pivotal role across a spectrum of disciplines such as nanoelectromechanical systems, nanoelectronics, and energy applications. As nanowires continue to diminish in dimensions, their mechanical characteristics are…
The issue of ice accumulation at low-temperature circumstances causes multiple problems and serious damages in many civil infrastructures which substantially influence human daily life. However, despite the significant consideration in…
We model the stabilization of clusters and lattices of cuboidal particles with long-ranged magnetic dipolar and short-ranged surface interactions. Two realistic systems were considered: one with magnetization orientated in the [001]…
The nonlinear mechanical response of carbon nanotubes, referred to as their "buckling" behavior, is a major topic in the nanotube research community. Buckling means a deformation process in which a large strain beyond a threshold causes an…
Nano-scale eutectics, such as rapid solidified Al-Si, exhibit enhanced yield strength and strain hardening but plasticity is limited by cracking of the hard phase (Si). Mechanisms that may suppress cracking and enable plastic co-deformation…
Three powder samples of Ni nanochains formed of polycrystalline Ni nanoparticles with an estimated diameter of about 30 nm have been synthesized by a wet chemical method using different organic surfactants. These samples, having…
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely…
Electrostatically actuated nanotubes and nanowires have many promising applications as nano-switches, ultra sensitive sensors and signal processing elements. These devices can be modelled as slender beams with circular cross-section. In…
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
Building two-dimensional (2D) van der Waals (vdW) heterostructures and enhancing their properties through strain engineering unlocks new applications for their constituent materials. In this study, we present a comprehensive…
Artificially engineered superlattices were designed and fabricated to induce different growth mechanisms and structural characteristics. DC sputtering was used to grow ferromagnetic (La$_{0.8}$Ba$_{0.2}$MnO$_3$) / ferroelectric…
We measure the stress state in and around a deformation nanotwin in a twinning-induced plasticity (TWIP) steel. Using four-dimensional scanning transmission electron microscopy (4D-STEM), we measure the elastic strain field in a…
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic…
For years, solution processing has provided a versatile platform to extend the applications of transition metal dichalcogenides (TMDs) beyond those achievable with traditional preparation methods. However, existing solution-based synthesis…