相关论文: Wind Tunnel Testing and Modeling Implications of a…
This paper presents a method to design and develop scaled down models of Horizontal Axis Wind Turbine (HAWT) to test in a limited sized wind tunnel. The mathematical design of a HAWT is carried out at a rated speed of 5 m/s, by using…
Wind tunnel's consisting an array of computer controlled/programmable fans have evolved over the last three decades for simulating the atmospheric turbulence to study the aerodynamic loads over bluff bodies such as buildings and bridges. In…
Based on a series of two experimental campaigns testing advanced controllers on a scaled wind turbine operating in a wind tunnel, this contribution describes the overall experimental method, challenges faced, lessons learned, and…
To design and optimize arrays of vertical-axis wind turbines (VAWTs) for maximal power density and minimal wake losses, a careful consideration of the inherently three-dimensional structure of the wakes of these turbines in real operating…
Computational fluid dynamics (CFD) studies are carried out on a two-bladed vertical axis wind turbine (VAWT) operating at a wind speed of 8 m/s for the tip speed ratios ($\lambda$) of 0.50 - 3.0. The blade consists of the NACA 0021 airfoil…
This paper presents a numerical and experimental analysis of the patent of a device to be used in vertical-axis wind turbines (VAWTs) under extreme wind conditions. The device consists of two hemispheres interconnected by a set of…
The wind tunnel rotary-balance testing is widely used in aircraft dynamics to characterise aerodynamics at moderate and high angles of attack during stall and spin regimes. In such experiments an aircraft test model is rotated along the…
Electric Vertical Takeoff and Landing (eVTOL) vehicles will open new opportunities in aviation. This paper describes the design and wind tunnel analysis of an eVTOL uncrewed aircraft system (UAS) prototype with a traditional aircraft wing,…
Many traditional methods for wind turbine design and analysis assume quasi-steady aerodynamics, but atmospheric flows are inherently unsteady and modern turbine blades are susceptible to aeroelastic deformations. This study therefore…
The study of droplet generation in wind tunnels in conducting icing experiments is of great importance in determining ice formation on structures or surfaces, where parameters such as Liquid Water Content (LWC) and Median Volumetric…
In order to study the effects of pressure gradients, flow expansion, and recompression on the stability of hypersonic boundary-layers, axisymmetric cone-cylinder-flare configurations have been specifically designed for wind tunnel…
Wind turbines operating within wind farms experience complex aerodynamic loading arising from the interplay between wake-induced velocity deficits, enhanced turbulence, and varying operational conditions. Understanding the relationship…
Cross-flow turbines harness kinetic energy in wind or moving water. Due to their unsteady fluid dynamics, it can be difficult to predict the interplay between aspects of rotor geometry and turbine performance. This study considers the…
This study explored the aerodynamics of a new multi-stage co-axial vertical-axis wind turbine based on bio-inspiration from natural swimming habit of fish. The turbine was formed from a conventional straight-bladed vertical-axis turbine…
Understanding and accurately reproducing gust-induced unsteady aerodynamics is essential for improving load prediction, aeroelastic analysis, and control strategies in aircraft, uninhabited aerial vehicles, and wind turbines, particularly…
This study presents an integrated methodology for fault detection in wind turbine blades using 3D-printed scaled models, finite element simulations, experimental modal analysis, and machine learning techniques. A scaled model of the NREL…
The present research aims to enhance the efficiency of a DTU-10MW Horizontal Axis Wind Turbine (HAWT) via Active Flow Control (AFC) implementation and using Synthetic Jets (SJ). In the initial part of the study the flow around two airfoil…
In this report a wind tunnel is described in term of its design, its construction as well as in its validation of flow features. This wind tunnel is characterized by a new unconventional design. The innovative design allows an unusual long…
In order to shed light on the Vertical-Axis Wind Turbines (VAWT) wake characteristics, in this paper we present high-fidelity CFD simulations of the flow around an exemplary H-shaped VAWT turbine, and we propose to apply Proper Orthogonal…
The SWUF-3D drone fleet is used in the atmospheric boundary layer (ABL) for in situ turbulence measurements of complex flows, such as in mountainous terrain or wind turbine wakes. Previous calibrations for measuring vertical wind speed $w$…