相关论文: Mitigation of self-generated RFI using ASKAP's pha…
We present results from a first attempt to mitigate radio frequency interference in real-time during astronomical measurements with a phased array feed on the 64 m Parkes radio telescope. Suppression of up to 20 dB was achieved despite…
We present an initial analysis of Radio Frequency Interference (RFI) flagging statistics from archived Australian SKA Pathfinder (ASKAP) observations for the 'Survey and Monitoring of ASKAP's RFI environment and Trends' (SMART) project. The…
Active Radio Frequency Interference (RFI) mitigation becomes a necessity for radio astronomy. The solution commonly applied by the community consists in monitoring the statistics of the received signal, and flag out the detected corrupted…
Radio frequency interference (RFI) is the principal factor limiting the sensitivities of radio telescopes, particularly at frequencies below 1 GHz. I present a conceptually new approach to mitigation of RFI in interferometric data. This has…
Radio interferometers are phased arrays producing high-resolution images from the covariance matrix of measurements. Calibration of such instruments is necessary and is a critical task. This is how the estimation of instrumental errors is…
Connected radio interferometers are sometimes used in the tied-array mode: signals from antenna elements are coherently added and the sum signal applied to a VLBI backend or pulsar processing machine. Usually there is no computer-controlled…
Since January 2017, the Commensal Real-time ASKAP Fast Transients survey (CRAFT) has been utilising commissioning antennas of the Australian SKA Pathfinder (ASKAP) to survey for fast radio bursts (FRBs) in fly's eye mode. This is the first…
The Murchison Widefield Array (MWA) is a new low-frequency interferometric radio telescope built in Western Australia at one of the locations of the future Square Kilometre Array (SKA). We describe the automated radio-frequency interference…
RFI mitigation is a critically important issue in radio astronomy using existing instruments as well as in the development of next-generation radio telescopes, such as the Square Kilometer Array (SKA). Most designs for the SKA involve…
In radio astronomy, radio frequency interference (RFI) becomes more and more serious for radio observational facilities. The RFI always influences the search and study of the interesting astronomical objects. Mitigating the RFI becomes an…
Radio astronomy observational facilities are under constant upgradation and development to achieve better capabilities including increasing the time and frequency resolutions of the recorded data, and increasing the receiving and recording…
Radio Frequency Interference (RFI) is a growing concern in the radio astronomy community. Single-dish telescopes are particularly susceptible to RFI. Several methods have been developed to cope with RF-polluted environments, based on…
As radio telescopes become sensitive, radio frequency interference (RFI) is more and more serious for interesting signals of radio astronomy. There exist demands for developing an automatic, accurate and efficient RFI mitigation method.…
The sensitivity of radio astronomical stations is often limited by man-made radio frequency interference (RFI) due to a variety of terrestrial activities. An RFI mitigation subsystem (RFIMS) based on real-time digital signalprocessing is…
Phased array feeds (PAFs) for reflector antennas offer the potential for increased reflector field of view and faster survey speeds. To address some of the development challenges that remain for scientifically useful PAFs, including…
Passive space-borne radiometers operating in the 1400-1427 MHz protected frequency band face radio frequency interference (RFI) from terrestrial sources. With the growth of wireless devices and the appearance of new technologies, the…
The Boolardy Engineering Test Array is a 6 x 12 m dish interferometer and the prototype of the Australian Square Kilometre Array Pathfinder (ASKAP), equipped with the first generation of ASKAP's phased array feed (PAF) receivers. These…
Radio-frequency interference (RFI) is a major systematic limitation in radio astronomy, particularly for science cases requiring high sensitivity, such as 21 cm cosmology. Traditionally, RFI is dealt with by identifying its signature in the…
This paper presents an overview of methods for mitigating radio frequency interference (RFI) in radio science data. The primary purpose of mitigation is to assist observatories to take useful data outside frequency bands allocated to the…
Pulsar detection and timing experiments are applications where adaptive filters seem eminently suitable tools for radio-frequency-interference (RFI) mitigation. We describe a novel variant which works well in field trials of pulsar…