相关论文: High Numerical Aperture and Broadband Achromatic F…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we…
We experimentally demonstrate imaging in the longwave-infrared (LWIR) spectral band (8um to 12um) using a single polymer flat lens based upon multi-level diffractive optics. The device thickness is only 10{\mu}m, and chromatic aberrations…
We present two long-working-distance objective lenses with numerical apertures (NA) of 0.29 and 0.4 for single-atom experiments. The objective lenses are assembled entirely by the commercial on-catalog $\Phi$1'' singlets. Both the…
Integrating conventional optics into compact nanostructured surfaces is the goal of flat optics. Despite the enormous progress of this technology, there are still critical challenges for real world applications due to a limited efficiency…
Two key metrics for imaging systems are their magnification and optical bandwidth. While high-quality imaging systems today achieve bandwidths spanning the whole visible spectrum and large changes in magnification via optical zoom, these…
Miniaturized photodetectors are becoming increasingly sought-after components for a range of next generation technologies, such as autonomous vehicles, integrated wearable devices, or gadgets embedded in the Internet of Things. A major…
Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous,…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
Compound eyes found in insects provide intriguing sources of biological inspiration for miniaturized imaging systems. Inspired by such insect eye structures, we demonstrate an ultrathin arrayed camera enabled by a flat multilevel…
Wide field of view and light weight optics are critical for advanced eyewear, with applications in augmented/virtual reality and night vision. Conventional refractive lenses are often stacked to correct aberrations at wide field of view,…
Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale…
The concept of optical phase discontinuities is applied to the design and demonstration of aberration-free planar lenses and axicons, comprising a phased array of ultrathin subwavelength spaced optical antennas. The lenses and axicons…
Zoom metalens doublet exhibits unprecedented advantages over the traditional zoom lens in many aspects, like ultra-compactness, CMOS compatibility, and miniaturization. However, most of them can only work in a narrow band due to chromatic…
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…
Metasurface lenses, namely metalenses, are ultrathin planar nanostructures that are capable of manipulating the properties of incoming light and imparting lens-like wavefront to the output. Although they have shown promising potentials for…
Conventional imaging systems comprise large and expensive optical components which successively mitigate aberrations. Metasurface optics offers a route to miniaturize imaging systems by replacing bulky components with flat and compact…
We designed and fabricated a flat multi-level diffractive lens (MDL) that is achromatic in the SWIR band (875nm to 1675nm). The MDL had a focal length of 25mm, aperture diameter of 8.93mm and thickness of only 2.6um. By pairing the MDL with…
Metalenses offer the ground-breaking opportunity to realize highly performing low-weight, flat and ultrathin, optical elements which substantially reduce size and complexity of imaging systems. Today, a major challenge in metalenses design…
High-quality flat optical elements require efficient light deflection to large angles and over a wide wavelength spectrum. Although phase gradient metasurfaces achieve this by continuously adding phase shifts in the range of 0 to 2{\pi} to…
Dispersion engineering is essential to the performance of most modern optical systems including fiber-optic devices. Even though the chromatic dispersion of a meter-scale single-mode fiber used for endoscopic applications is negligible,…