相关论文: Integrating Multi -WAN, VPN and IEEE 802.3ad for A…

The IEEE 802.11 protocol is a popular standard for wireless local area networks. Its medium access control layer (MAC) is a carrier sense multiple access with collision avoidance (CSMA/CA) design and includes an exponential backoff…

In highly-dense IEEE 802.11 deployments, areas covered by multiple Wireless Local Area Networks (WLANs) will be common. This opens the door for stations equipped with multiple IEEE 802.11 interfaces to use several WLANs simultaneously,…

WLAN is one of the most successful applications of wireless communications in daily life because of low cost and ease of deployment. The enabling technique for this success is the use of random access schemes for the wireless channel.…

Integrated sensing and communication (ISAC) is a key enabler for low-altitude wireless networks (LAWNs), providing simultaneous environmental perception and data transmission in complex aerial scenarios. By combining heterogeneous sensing…

Throughput improvement of the Wireless LANs has been a constant area of research. Most of the work in this area, focuses on designing throughput optimal schemes for fully connected networks (no hidden nodes). But, we demonstrate that the…

Integrated sensing and communication (ISAC) is a promising solution to accelerate edge inference via the dual use of wireless signals. However, this paradigm needs to minimize the inference error and latency under ISAC co-functionality…

Multi-access edge computing (MEC) is viewed as an integral part of future wireless networks to support new applications with stringent service reliability and latency requirements. However, guaranteeing ultra-reliable and low-latency MEC…

Currently IPv6 is extremely popular with companies, organizations and Internet service providers (ISP) due to the limitations of IPv4. In order to prevent an abrupt change from IPv4 to IPv6, three mechanisms will be used to provide a smooth…

The end-to-end throughput of multi-hop communication in wireless ad hoc networks is affected by the conflict between forwarding nodes. It has been shown that sending more packets than maximum achievable end-to-end throughput not only fails…

We consider a novel ultra-narrowband (UNB) low-power wide-area network (LPWAN) architecture design for uplink transmission of a massive number of Internet of Things (IoT) devices over multiple multiplexing bands. An IoT device can randomly…

IEEE 802.11 is a widely used wireless LAN standard for medium access control. TCP is a prominent transport protocol originally designed for wired networks. TCP treats packet loss as congestion and reduces the data rate. In wireless networks…

The IEEE 802.15.4 standard allows for the deployment of cost-effective and energy-efficient multi-hop networks. This document features an in-depth presentation of an analytical model for assessing the performance of such networks. It…

Seamless redundancy can be profitably exploited to improve predictability of wireless networks in general and, in particular, IEEE 802.11. According to this approach, packets are transmitted by senders on two (or more) channels at the same…

Recent studies have shown that a system composed from several randomly interdependent networks is extremely vulnerable to random failure. However, real interdependent networks are usually not randomly interdependent, rather a pair of…

Various current trends such as ever growing population and accelerated aging effects have effectively promoted the growth of Wireless Body Area Network (WBAN). Being the specialized standard of WBAN, the burgeoning IEEE 802.15.6 is on its…

A new backward compatible WiFi amendment is under development by the IEEE bd Task Group towards the so-called IEEE 802.11bd, which includes the possibility to transmit up to three repetitions of the same packet. This feature increases time…

As parallelism becomes critically important in the semiconductor technology, high-performance computing, and cloud applications, parallel network systems will increasingly follow suit. Today, parallelism is an essential architectural…

We design a cross-layer approach to optimize the joint use of multi-packet reception and network coding, in order to relieve congestion. We construct a model for the behavior of the 802.11 MAC and apply it to several key canonical topology…

We design a cross-layer approach to aid in develop- ing a cooperative solution using multi-packet reception (MPR), network coding (NC), and medium access (MAC). We construct a model for the behavior of the IEEE 802.11 MAC protocol and apply…

Edge computing has gained attention in recent years due to the adoption of many Internet of Things (IoT) applications in domestic, industrial and wild settings. The resiliency and reliability requirements of these applications vary from…