相关论文: Gradient bandgap enables >13% efficiency sulfide K…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…
A coupled optoelectronic model was implemented along with the differential evolution algorithm to assess the efficacy of grading the bandgap of the CZTSSe layer for enhancing the power conversion efficiency of thin-film CZTSSe solar cells.…
Kesterite is a leading candidate among inorganic thin-film photovoltaic technologies, offering sustainable and environmentally friendly solutions without reliance on critical raw materials. This study investigates the performance of…
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of…
Flexible Cu2ZnSn(S, Se)4 (CZTSSe) solar cells take the advantages of environmental friendliness, low cost, and multi-scenario applications, and have drawn extensive attention in recent years. Compared with rigid devices, the lack of alkali…
Organic-inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cell building blocks. Their high light absorption coefficients and long diffusion lengths suggest high power conversion efficiencies…
Thin-film solar cells based on kesterite (Cu2ZnSnSe4) material are a promising alternative for photovoltaic devices due to their composition consisting of earth abundant elements, ease of production at a relatively low temperatures and…
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2…
The efficiencies of solar cells based on kesterite Cu$_2$ZnSnS$_4$ (CZTS) and Cu$_2$ZnSnSe$_4$ (CZTSe) are limited by a low open-circuit voltage due to high rates of non-radiative electron-hole recombination. To probe the origin of this…
Dual-absorber solar cells represent a promising approach to surpass the efficiency limit of single-junction devices by extending spectral absorption and minimizing thermalization losses. Among earth-abundant thin-film materials, kesterites…
The power conversion efficiency of an ultrathin CIGS solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS…
Sulfide chalcopyrite Cu(In,Ga)S2 (CIGS) is a wide bandgap semiconductor suitable for the top cell of a tandem solar device. Here we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S2…
Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness.…
The electronic and optical properties of CdGa2Te4 and ZnGa2Te4 were studied using first-principles DFT calculations. Band gaps were calculated using the GGA-PBESol functional. Both materials show promise for photovoltaic applications…
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S2 (CIGS) thin film absorbers for high efficiency solar cells. Our findings demonstrate that the…
The monolithic tandem integration of third-generation solar energy materials on silicon holds great promise for photoelectrochemistry and photovoltaics. However, this can be challenging when it involves high-temperature reactive processes,…
Kesterite Cu2ZnSn(S, Se)4 (CZTSSe) solar cell has emerged as one of the most promising candidates for thin-film photovoltaics. However, severe charge losses occurring at the grain boundaries (GBs) of Kesterite polycrystalline absorbers has…
In kesterite CZTSSe solar cell research, an asymmetric crystallization profile is often obtained after annealing, resulting in a bilayered or double-layered absorber. So far, only segregated pieces of research exist to characterize this…
Streamlined prediction of the electronic properties of photoactive materials warrants a Density Functional Theory (DFT) based approach that (i) yields reliable bandgaps, (ii) is free of empirically tuned parameters, and (iii) exhibits low…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…