相关论文: Software and Firmware-logic Design for the PIP-II …

The PIP-II Injector Test 1 PIP2IT facility accelerator was assembled in multiple stages in 2014 $-$ 2021 to test concepts and components of the future PIPII linac that is being constructed at Fermilab. In its final configuration, PIP2IT…

In Fermilab's PIP-II machine protection system, beam loss signals from various detectors are digitized at 125 MS/s. Noise from both high-frequency sources and low-frequency 60 Hz AC power equipment can contaminate the data. To suppress…

Details on Final design for Cryogenic Electrical & Controls System for Fermilab' s next-gen particle accelerator PIP-II. Electrical Controls System includes instrumentation and controls of Cryogenics Distribution System and Cryomodules.…

Operation of complex systems which depend on one, or more, sub-systems with many process variables often operate in more than one state. For each state there may be a variety of parameters of interest, and for each of these, one may require…

Machine protection, as part of accelerator control systems, can be managed with a 'functional safety' approach, which takes into account product life cycle, processes, quality, industrial standards and cybersafety. This paper will discuss…

Fermilab's Superconducting RF Beam Test Facility currently under construction will produce electron beams capable of damaging the acceleration structures and the beam line vacuum chambers in the event of an aberrant accelerator pulse. The…

Embedded software used in industrial systems frequently relies on data that ensures the correct and efficient operation of these systems. Thus, companies invest considerable resources in fine-tuning this data, making it their valuable…

An important aspect of many particle accelerators is the constant evolution and frequent configuration changes that are needed to perform the experiments they are designed for. This often leads to the design of configurable software that…

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA…

Fermilab has traditionally not been an EPICS house; as such expertise in EPICS is limited and scattered. PIP-II will be using EPICS for its control system. When in operation, it will need to interface with the existing, modernized (see…

The Proton Improvement Plan-II (PIP-II) is a major upgrade to the Fermilab accelerator complex, featuring a new 800-MeV Superconducting Radio-Frequency (SRF) linear accelerator (LINAC) powering the accelerator complex to provide the world's…

Cyber-physical systems (CPS) are composed of various embedded subsystems and require specialized software, firmware, and hardware to coordinate with the rest of the system. These multiple levels of integration expose attack surfaces which…

The central part of PIP-II program of upgrades pro-posed for the Fermilab injection complex is an 800 MeV, 2 mA, CW-compatible SRF linac. Acceleration in super-conducting cavities begins from a low energy of 2.1 MeV, so that the first…

Safety Instrumented Systems (SIS) protect major hazard facilities, e.g. power plants, against catastrophic accidents. An SIS consists of hardware components and a controller software -- the ``program''. Current safety analyses of SIS'…

For the PIP-II Injector Test (PI-Test) at Fermilab, a four-vane radio frequency quadrupole (RFQ) is designed to accelerate a 30-keV, 1-mA to 10-mA, H- beam to 2.1 MeV under both pulsed and continuous wave (CW) RF operation. The available…

Process Management Systems (PMSs) are currently more and more used as a supporting tool for cooperative processes in pervasive and highly dynamic situations, such as emergency situations, pervasive healthcare or domotics/home automation.…

The EPICS based control system of the ISAC radioactive beam facility supervises several sub-systems, which are controlled by PLCs. Most of the devices are protected by non-trivial interlocks, which are implemented with ladder-logic…

An extensible power supply control and monitoring system has been developed at Fermilab's Technical Division as a result of requirements to control and monior power supplies of various types from within many different applications. This…

Reliable, high-intensity operation of the Fermilab Accelerator Complex is critical to the success of the Long-Baseline Neutrino Facility and Deep Underground Neutrino Experiment. We describe the requirements and infrastructure necessary to…

Active components, such as actuators, constitute a fundamental aspect of engineering systems, affording the freedom to shape system behavior as desired. However, this capability necessitates energy consumption, primarily in the form of…