相关论文: Profiles of static liquid-gas interfaces in axisym…
Non-linear equations of radial motion of a gas bubble in a compressible viscous liquid have been modified considering effects of viscosity and compressibility more complete than all previous works. A new set of equations has been derived…
In order for a droplet to rebound rather than coalesce with a liquid bath, a layer of gas must persist throughout the impact. This gas, typically an air layer acts as a lubricant to the system and permits a pressure transfer between the two…
Interfaces between two fluids are ubiquitous and of special importance for industrial applications, e.g., stabilisation of emulsions. The dynamics of fluid-fluid interfaces is difficult to study because these interfaces are usually…
This paper investigates the relationship between the contact angle of a spherical bubble attached to a tube submerged in a container and the jet speed induced by an impulsive acceleration at its base. While it has been well established that…
The steady motion and deformation of a lipid-bilayer vesicle translating through a circular tube in low Reynolds number pressure-driven flow are investigated numerically using an axisymmetric boundary element method. This fluid-structure…
We report on recent progress in the physical and numerical modeling of compressible two-phase flows that involve phase transition between the liquid and gaseous state of the fluid. The high-speed dynamics of cavitation bubbles is studied in…
Aiming for the simulation of colloidal droplets in microfluidic devices, we present here a numerical method for two-fluid systems subject to surface tension and depletion forces among the suspended droplets. The algorithm is based on an…
Aqueous foams coarsen with time due to gas diffusion through the liquid. The mean bubble size grows, and small bubbles vanish. However, coarsening is little understood for foams with an intermediate liquid content, particularly in the…
Turbulent flows laden with small bubbles are ubiquitous in many natural and industrial environments. From the point of view of numerical modeling, to be able to handle a very large number of small bubbles in direct numerical simulations,…
In bubble-assisted Liquid HoleMultipliers(LHM), developed for noble-liquid radiation detectors, the stability of the bubble and the electro-mechanical properties of the liquid-to-gas interface play a dominant role in the detector…
When a liquid slams into a solid, the intermediate gas is squeezed out at a speed that diverges when approaching the moment of impact. Although there is mounting experimental evidence that instabilities form on the liquid interface during…
The compression of a cylindrical gas bubble by an imploding molten lead (Pb) shell may be accompanied by the development of the Richtmyer-Meshkov (RM) instability at the liquid-gas interface due to the initial imperfection of the interface.…
We consider a coexistence of two axisymmetric liquid bridges LB_i and LB_m of two immiscible liquids i and m which are immersed in a third liquid (or gas) e and trapped between two smooth solid bodies with axisymmetric surfaces S_1,S_2 and…
We investigate the modes of deformation of an initially spherical bubble immersed in a homogeneous and isotropic turbulent background flow. We perform direct numerical simulations of the two-phase incompressible Navier-Stokes equations,…
Liquid simulations for computer animation often avoid simulating the air phase to reduce computational costs and ensure good conditioning of the linear systems required to enforce incompressibility. However, this free surface assumption…
A two-phase, low-Mach-number flow solver is created and verified for variable-density liquid and gas with phase change. The interface is sharply captured using a split Volume-of-Fluid method generalized for a non-divergence-free liquid…
The states of gas accumulated at the liquid-solid interface are analyzed based on the continuum theory where the Hamaker constant is used to describe the long-range interaction at the microscopic scale. The Hamaker constant is always…
Cavitation in tubes is a common occurrence in nature and engineering applications. Previous studies of cavitation bubble dynamics mainly consider bubbles in stagnant-water tubes, but the dynamics of cavitation bubbles in tubes with flow is…
The properties of the interface in a phase-separated solution of polymers with different degrees of polymerization and Kuhn segment lengths are calculated. The starting point is the planar interface, the profile of which is calculated in…
The propagation and roughening of a liquid-gas interface moving through a disordered medium under the influence of capillary forces is considered. The system is described by a phase-field model with conserved dynamics and spatial disorder…