相关论文: Multi-target Detection for Reconfigurable Holograp…

Reconfigurable intelligent surface (RIS) is considered to be an energy-efficient approach to reshape the wireless environment for improved throughput. Its passive feature greatly reduces the energy consumption, which makes RIS a promising…

Reconfigurable distributed antenna and reflecting surface (RDARS) is a promising architecture for future sixth-generation (6G) wireless networks. In particular, the dynamic working mode configuration for the RDARS-aided system brings an…

Reconfigurable intelligent surfaces (RIS) have been actively researched as a potential technique for future wireless communications, which intelligently ameliorate the signal propagation environment. In the conventional design, each RIS…

Terahertz (THz) systems have the benefit of high bandwidth and hence are capable of supporting ultra-high data rates, albeit at the cost of high pathloss. Hence they tend to harness high-gain beamforming. Therefore a novel hybrid 3D…

Conventional antenna arrays rely primarily on digital beamforming for spatial control. While adding more elements can narrow beamwidth and suppress interference, such scaling incurs prohibitive hardware and power costs. Rotatable antennas…

Reconfigurable intelligent surfaces (RISs) have huge potential to improve spectral and energy efficiency in future wireless systems at a minimal cost. However, early prototype results indicate that deploying hundreds or thousands of…

In this paper, we investigate a novel multiple-input multiple-output (MIMO) radar system aided by phase shifter based polarization-reconfigurable antennas (PRAs). Specifically, a base station (BS) equipped with multiple PRAs at both the…

Modern imaging and sensing in complex environments, ranging from biomedical diagnostics to wireless communication, relies on accurately measuring and then controlling the wave propagation. Conventional approaches demand large arrays of…

This study considers a point-to-point wireless link, in which both the transmitter and receiver are equipped with multiple antennas. In addition, two reconfigurable metasurfaces are deployed, one in the immediate vicinity of the transmit…

Integrated sensing and communication (ISAC) can perform both communication and sensing tasks using the same frequency band and hardware, making it a key technology for 6G. As a low-cost implementation for large-scale antenna arrays,…

Reconfigurable Intelligent Surface (RIS) has becoming a useful tool in future wireless communication systems for close-distance communication network. This paper we use Reconfigurable Intelligent Surface (RIS) for downlink multi-user…

Conventional multistatic radar systems using microwave and millimeter-wave (mm-wave) frequencies seek to reconstruct the target in the imaging domain, employing many transmitting and receiving antenna elements. These systems are suboptimal,…

This paper pioneers the field of multi-user holographic unmanned aerial vehicle (UAV) communications, laying a solid foundation for future innovations in next-generation aerial wireless networks. The study focuses on the challenging problem…

Devices that detect angle-of-arrival (AoA) over a wide field of view are crucial for various applications such as wireless communication and navigation. They are often installed on platforms with challenging mechanical and stealth…

To overcome the challenges of ultra-low latency, ubiquitous coverage, and soaring data rates, this article presents a combined use of Near Field Communication (NFC) and Reconfigurable Holographic Surfaces (RHS) for Non-Terrestrial Networks…

This paper proposes a bidirectional multibeam hybrid transmitarray (HTA) employing a transmission polarization-rotating metasurface (TPRM). A novel configuration is introduced to facilitate bidirectional beam scanning by combining the…

Multiplicative fading is a major limitation of reconfigurable intelligent surfaces (RIS), restricting their effective coverage in both existing sub-6GHz systems and future mmWave networks. Although active RIS architectures mitigate this…

Distributed Antenna Systems (DASs) employ multiple antenna arrays in remote radio units to achieve highly directional transmission and provide great coverage performance for future-generation networks. However, the utilization of active…

Intelligent reflecting surface (IRS) is envisioned as a promising hardware solution to hardware cost and energy consumption in the fifth-generation (5G) mobile communication network. It exhibits great advantages in enhancing data…

In millimeter wave (mmWave) systems, the advanced lens antenna array can effectively reduce the radio frequency chains cost. However, the mmWave signal is still vulnerable to blocking obstacles and suffers from severe path loss. To address…