相关论文: Coupler RF kick and emittance optimization of the …

One of the main concerns in the design of low emittance linear accelerators (linacs) is the preservation of beam emittance. Here we discuss one possible source of emittance dilution, the coupler kick, due to transverse electromagnetic…

Superconducting TESLA-type cavities are widely used to accelerate electrons in long bunch trains, such as in high repetition rate free electron lasers. The TESLA cavity is equipped with two higher order mode couplers and a fundamental power…

A solid state emitter coupled to a photonic crystal cavity exhibits increased photon emission into a single frequency mode. However, current designs for photonic crystal cavities coupled to quantum emitters have three main problems:…

A key factor in any RF system is the mechanism for coupling the RF power from an amplifier into an accelerating cavity. Any tranmission line will experience reflections if there is a mismatch in the impedance between the line and its load.…

The CLIC damping rings will produce ultra-low emittance beam, with high bunch charge, necessary for the luminosity performance of the collider. To limit the beam emittance blow-up due to oscillations, the pulse power modulators for the…

A multi-laboratory collaboration is studying the feasibility of building a muon collider, the first phase of which maybe a neutrino factory. The phase space occupied by the muons is very large and needs to be cooled several orders of…

We report the results of a recent beam dynamics study, motivated by the need to redesign the LCLS photoinjector, that lead to the discovery of a new effective working point for a split RF photoinjector. We consider the emittance…

The muon collider has the potential to be a powerful tool for the exploration of frontiers in particle physics. In order to reach high luminosity, the 6D emittance of the muon beam needs to be reduced by several orders of magnitude. The…

The fast extraction kicker system is one of the most important accelerator components, whose inner structure will be the main source of the impedance in the RCS. It is necessary to understand the kicker impedance before its installation…

Efficient injection of spin-polarized current into a semiconductor is a basic prerequisite for building semiconductor-based spintronic devices. Here, we use inelastic electron tunneling spectroscopy to show that the efficiency of…

We propose and demonstrate localized mode coupling as a viable dispersion engineering technique for phase-matched resonant four-wave mixing (FWM). We demonstrate a dual-cavity resonant structure that employs coupling-induced frequency…

Inspired by the development of over-moded RF component as an undulator, we explored another over-moded structure that could serve the variable coupling for SRF purpose. This application is to fulfill variation of S11 from 0 to -20db with CW…

For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several…

We calculate the kick generated by an eccentric black hole binary inspiral as it evolves through a resonant orbital configuration where the precession of the system temporarily halts. As a result, the effects of the asymmetric emission of…

Construction of the new fourth generation synchrotron radiation facility (SRF) "SKIF" near Novosibirsk is nearing completion. "SKIF" uniqueness is ultra-low 75 pm natural emittance at 400 mA beam current and 3 GeV beam energy. Collective…

We propose and demonstrate a self-coupled microring resonator for resonance splitting by mutual mode coupling of cavity mode and counter-propagating mode in Silicon-on-Insulator platform The resonator is constructed with a self-coupling…

It is well-known that the electron beam quality required for applications such as FELs and ultra-fast electron diffraction can be degraded by the asymmetric fields introduced by the RF couplers of superconducting linacs. This effect is…

In the upgrade project of Hefei Light Source (HLS II), a new digital longitudinal bunch-by-bunch feedback system will be developed to suppress the coupled bunch instabilities in the storage ring effectively. We design a new waveguide…

The accuracy of gravitational-wave models of compact binaries has traditionally been addressed by the mismatch between the model and numerical-relativity simulations. This is a measure of the overall agreement between the two waveforms.…

This paper introduces a newly designed cavity tuner for superconducting radio-frequency (SRF) cavity. Aiming to overcome the drawbacks of traditional tuning systems, like the limited tuning range of piezoelectric tuner and the low-speed…