相关论文: Closed-Form Solutions for Grid-Forming Converters:…

This paper explores the stability of nonsynchronous hybrid ac/dc power grids under the grid-forming hybrid angle control strategy. We formulate dynamical models for the ac grids and transmission lines, interlinking converters, and dc…

Virtual Oscillator (VO) control is the latest and promising control technique for grid-forming and grid-supporting inverters. VO Controllers (VOCs) provide time-domain synchronization with a connected electrical network. At the same time, a…

This paper investigates the design and analysis of a novel grid-forming (GFM) control method for grid-connected converters (GCCs). The core novelty lies in a virtual flux observer-based synchronization and load angle control method. The…

According to the well-known loop shaping method for the design of controllers, the performance of the controllers in terms of step response, steady-state disturbance rejection and noise attenuation and robustness can be improved by…

Current-mode control is one of the most popular controller strategies for power converters. With the advent of wide bandgap devices including GaN and SiC, higher switching frequencies have become more viable at higher power because of lower…

This paper discusses some aspects of control schemes for voltage source converters under abnormal conditions. The control schemes are developed specifically for the situations when one or more system parameters vary significantly to the…

Most previously proposed controllers are analyzed in the small-signal/quasi-steady regime rather than large-signal or transient stability for grid-forming inverters (GFMI). Additionally, methods that presume system-wide data--global…

Three-phase AC-DC rectifiers are fundamental components in modern power electronics systems, yet achieving rapid voltage regulation and precise current tracking under load and grid disturbances remains challenging due to nonlinear dynamics…

The series-paralleling technique of dc-dc converters is utilized in various domains of electrical engineering for improved power conversion. Previous studies have proposed and classified the control schemes for the series-paralleled…

Design-oriented boundary conditions for subharmonic oscillations are of great interest recently. Based on a subharmonic oscillation boundary condition reported in a PhD thesis more than a decade ago, extended new boundary conditions are…

This paper presents a passivity-based control framework for AC-DC converters supplying non-passive Information Technology rack loads in DC data centers. Unlike conventional cascaded proportional-integral controllers that ensure stability…

Design and implementation of an optimal and robust single-loop voltage controller is proposed for single-phase grid forming voltage source inverter (VSI). The objective of the proposed controller is to have good reference tracking and…

Impedance models are widely used in assessing small signal stability of grid-tied voltage source converter (VSC) systems. Recent research has proven that impedance models of grid-tied VSC in both dq and sequence domains are generally…

This work focuses on grid-forming (GFM) control of Interconnecting Power Converters (IPCs) that are used to interconnect multiple HVAC and HVDC subgrids to form a grid of grids. We introduce the concept of dual-port GFM control that…

This paper proposes a new strategy for optimal grid frequency regulation (FR) in an interconnected power system where regional ac grids and an offshore wind farm are linked via a multi-terminal high voltage direct-current (MTDC) network. In…

This paper demonstrates the key features of a control system applicable to inverter-based resources (IBR), which is based on grid-forming technology. Such resources are classified as grid-forming or grid-following converters based on the…

In this document, a nonlinear control law for a grid-tied converter is introduced. The converter topology consists of a voltage source inverter (VSI) linked to the grid through an inductive-capacitive second-order filter, its input being…

This letter proposes advanced beamforming design and analyzes its influence on the sensing and communications (S&C) performance for a multiple-antenna integrated S&C (ISAC) system with a single communication user and a single target. Novel…

Impedance-based stability analysis is appealing in the case of Single-Input Single-Output (SISO) systems. However, in the case of grid-tied voltage source converter (VSC) systems, dq impedances of source and load (VSC) subsystems are…

To address the frequency stability challenges posed by the rising penetration of power electronics in power systems, HVDC-connected offshore wind power plants (OWPPs) are increasingly expected to provide inertial response and frequency…