相关论文: Layer-to-Layer Melt Pool Control in Laser Powder B…

Open-loop control of laser powder bed fusion (LPBF) additive manufacturing (AM) has enabled the production of complex, high-criticality parts for various industries. This method relies on static parameter sets from extensive experimentation…

Laser powder bed fusion (LPBF) is an additive manufacturing technique that has gained popularity thanks to its ability to produce geometrically complex, fully dense metal parts. However, these parts are prone to internal defects and…

While considerable progress has recently been made in real-time melt pool monitoring for laser powder bed fusion (LPBF), results in in-situ melt pool control are relatively sparse, a major reason being lack of suitable control-oriented…

Powder-based additive manufacturing techniques provide tools to construct intricate structures that are difficult to manufacture using conventional methods. In Laser Powder Bed Fusion, components are built by selectively melting specific…

Metal Laser Powder Bed Fusion (PBF-LB/M) is a leading additive manufacturing technique in which part quality and grain morphology are highly dependent on process parameters. Numerous studies of process variations, such as laser power, scan…

Powder Bed Fusion (PBF) is an important Additive Manufacturing (AM) process that is seeing widespread utilization. However, due to inherent process variability, it is still very costly and time consuming to certify the process and the part.…

This study investigates the stabilization of interlayer temperature in the laser powder bed fusion process through a novel switched layer-to-layer closed-loop feedback controller. The controller architecture aims to measure the interlayer…

Laser Powder Bed Fusion (LPBF) additive manufacturing has revolutionized industries with its capability to create intricate and customized components. The LPBF process uses moving heat sources to melt and solidify metal powders. The fast…

Laser Powder Bed Fusion (L-PBF) is a widely adopted additive manufacturing process for fabricating complex metallic parts layer by layer. Effective thermal management is essential to ensure part quality and structural integrity, as thermal…

Numerical simulations of a complete laser powder bed fusion (LPBF) additive manufacturing (AM) process are extremely challenging or even impossible to achieve without a radical model reduction of the complex physical phenomena occurring…

Laser powder bed fusion (LPBF) has shown promise for wide range of applications due to its ability to fabricate freeform geometries and generate a controlled microstructure. However, components generated by LPBF still possess sub-optimal…

Powder Bed Fusion (PBF) is a type of Additive Manufacturing (AM) technology that builds parts in a layer-by-layer fashion out of a bed of metal powder via the selective melting action of a laser or electron beam heat source. The technology…

Numerical simulation of the laser powder bed fusion (LPBF) procedure for additive manufacturing (AM) is difficult due to the presence of multiple scales in both time and space, ranging from the part scale (order of millimeters/seconds) to…

Metal additive manufacturing (AM) by laser powder bed fusion (L-PBF) builds upon fundamentals established in the field of laser welding which include the influence of gas and plume dynamics on weld depth and quality. L-PBF demands a…

While multiple sensors are used for real-time monitoring in additive manufacturing, not all provide practical or reliable process insights. For example, high-speed X-ray imaging offers valuable spatial information about subsurface melt pool…

Laser powder bed fusion (LPBF) holds promise to efficiently produce metal parts. However, LPBF incurs stochastic melt pool (MP) spattering, which would roughen workpiece in-process surface, thus weakening inter-layer bonding and causing…

With a growing demand for high-quality fabrication, the interest in real-time process and defect monitoring of laser powder bed fusion (LPBF) has increased, leading manufacturers to incorporate a variety of online sensing methods including…

Defects in laser powder bed fusion (L-PBF) parts often result from the meso-scale dynamics of the molten alloy near the laser, known as the melt pool. For instance, the melt pool can directly contribute to the formation of undesirable…

Achieving desired mechanical properties in additive manufacturing requires many experiments and a well-defined design framework becomes crucial in reducing trials and conserving resources. Here, we propose a methodology embracing the…

Selective Laser Melting (SLM) is an additive manufacturing technology that builds three dimensional parts by melting layers of metal powder together with a laser that traces out a desired geometry. SLM is popular in industry, however the…