相关论文: A detailed numerical investigation of two-phase fl…
In liquid-fueled combustion systems, optimization of the fuel atomization process is critical to reducing fuel consumption and lowering pollutant emissions. Accurate and efficient computational modeling of liquid atomization can open the…
The research is devoted to the generation of fine particles and droplet flows with specified characteristics for a wide range of scientific problems. The aspects of aerodynamic fine atomization and the effects of atomizing gas density, gas…
Spray atomization process involves complex multi-phase phenomena. Abundant literature and validation of spray modelling for industrial applications like fuel injection in internal combustion and turbine jet engines are available. However,…
The secondary atomization of liquid droplets is a common physical phenomenon in many industrial and engineering applications. Atomization in high speed compressible flows is less well understood than its more frequently studied low Mach…
We investigate a two-dimensional network simulator that model the dynamics of two-phase immiscible bulk flow where film flow can be neglected. We present a method for simulating the detailed dynamical process where the two phases are…
Direct Numerical Simulations of the injection of a pulsed round liquid jet in a stagnant gas are performed in a series of runs of geometrically progressing resolution. The Reynolds and Weber numbers and the density ratio are sufficiently…
A thorough numerical, theoretical and experimental investigation of the liquid atomization in a full cone pressure swirl nozzle is presented. The first part is devoted to the study of the inner flow. CAD and CFD software are used in order…
The multifractal nature of drop breakup in air-blast nozzle atomization process has been studied. We apply the multiplier method to extract the negative and the positive parts of the f(alpha) curve with the data of drop size distribution…
The planar laminar flow resulting from the impingement of two gaseous jets of different density issuing into an open space from aligned steadily fed slot nozzles of semi-width $R$ separated a distance $2H$ is investigated by numerical and…
We propose a numerical approach to study the mechanics of a flowing bubble in a constraint micro channel. Using an open source two phase flow solver (Gerris, gfs.sourceforge.net) we compute solutions of the bubble dynamics (i.e. shape and…
In order to enhance the understanding of membrane fouling mechanism, the hydrodynamics of granular flow in a stirred enzymatic membrane reactor was numerically investigated in the present study. A three-dimensional Euler-Euler model,…
Spray formation and atomization in a gas-liquid mixing layer is an important fundamental problem of multiphase flows. It is highly desirable to visualize the detailed atomization process and to analyze the instabilities and mechanisms…
Aerobreakup of fluid droplets under the influence of impulsively generated high-speed gas flow using an open-ended shock tube is studied using experiments and numerical simulations. Breakup of mm-sized droplets at high Weber number was…
In this work we present, for the first time, a computational fluid dynamics tool for the simulation of the metered discharge in a pressurized metered dose inhaler. The model, based on open-source software, adopts the Volume-Of-Fluid method…
In this study, we perform a two-dimensional axisymmetric simulation to assess the flow characteristics and understand the film cooling process in a dual bell nozzle. The secondary stream with low temperature is injected at three different…
An understanding of the hydrodynamics of multiphase processes is essential for their design and operation. Multiphase computational fluid dynamics (CFD) simulations enable researchers to gain insight which is inaccessible experimentally.…
Gas-liquid flows through packed bed reactors (PBRs) are challenging to predict due to the tortuous flow paths that fluid interfaces must traverse. Experiments at the International Space Station showed that bubble and pulse flows are…
In this fluid dynamics video, we present a visualization of the primary atomization of a turbulent liquid jet injected into a turbulent gaseous crossflow. It is based on a detailed numerical simulation of the primary atomization region of…
In classical fluids, the Weber number is a dimensionless parameter that characterises the flow of a multi-phase fluid. The superfluid analogy of a classical multi-phase fluid can be realised in a system of two or more immiscible…
Spray formation in ambient atmosphere from gas-centered swirl coaxial atomizers is described by carrying out experiments in a spray test facility. The atomizer discharges a circular air jet and an axisymmetric swirling water sheet from its…