相关论文: ITER-IA 3D MHD Simulations of Shattered Pellet Inj…

This report is in partial fulfillment of deliverable D1.1 Optimization of the SPI model and summarizes axisymmetric ITER SPI parameter scans performed by the NIMROD code for several ITER equilibria. These axisymmetric parameter scans are to…

Shattered pellet injection (SPI) is selected for the disruption mitigation system in ITER, due to deeper penetration, expected assimilation efficiency and prompt material delivery. This article describes non-linear magnetohydrodynamic (MHD)…

Shattered pellet injection (SPI) as primary mitigation method for major disruptions in ITER has a large parameter space available for optimization including the total amount of injected material, the size of the individual pellet fragments,…

Shattered Pellet Injection (SPI) has become a critical technique for mitigating plasma disruptions in fusion devices, yet optimizing its efficiency demands a proper understanding of the interaction between impurity dynamics and MHD…

The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code.…

JOREK 3D non-linear MagnetoHydroDynamic (MHD) simulations of pure Deuterium Shattered Pellet Injection in ITER are presented. It is shown that such a scheme could allow diluting the plasma by more than a factor 10 without immediately…

Pellet injection is an important means to fuel and control discharges and mitigate disruptions in reactor-scale fusion devices. To accurately assess the efficiency of these applications, it is necessary to account for the drift of the…

Single carbon pellet disruption mitigation simulations using M3D-C1 were conducted in an NSTX-U-like plasma to support the electromagnetic pellet injection concept (EPI). A carbon ablation model has been implemented in M3D-C1 and tested…

Plasma-terminating disruptions represent a critical outstanding issue for reactor-relevant tokamaks. ITER will use shattered pellet injection (SPI) as its disruption mitigation system to reduce heat loads, vessel forces, and to suppress the…

First simulations of deuterium shattered pellet injection (SPI) into an ASDEX Upgrade H-Mode plasma with the JOREK MHD code are presented. Resistivity is increased by one order of magnitude in most simulations to reduce computational costs…

A disruption mitigation system (DMS) is necessary for fusion-grade tokamaks like ITER in order to ensure the preservation of machine components throughout their designated operational lifespan. To address the intense heat and…

This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron dynamics, using the disruption modelling tool DREAM. The physics fidelity is…

The lifetime and utilization of a nuclear fusion reactor like ITER depends strongly on its capabilities to mitigate damage during disruptions. While shattered pellet injection (SPI) was chosen as the baseline mitigation method for ITER, the…

The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and…

Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist…

In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study…

A real-time safe multi-threading library was developed on the DIII-D plasma control system to optimize the realtime TORBEAM and real-time STRIDE physics codes. These physics codes are crucial for future fusion power plant operation as they…

The Code O-SUKI-N 3D is an upgraded version of the 2D Code O-SUKI (Comput. Phys. Commun. 240, 83 (2019)). Code O-SUKI-N 3D is an integrated 3-dimensional (3D) simulation program system for fuel implosion, ignition and burning of a…

SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power…

We assess runaway-electron (RE) generation in ITER disruptions mitigated by shattered pellet injection (SPI) using improved physics modelling in the 1D disruption simulation framework Dream. To this end, we extend Dream with four…