相关论文: Large strain micromechanics of thermoplastic elast…
We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar…
Soft materials capable of large inelastic deformation play an essential role in high-performance nacre-inspired architectured materials with a combination of stiffness, strength and toughness. The rigid "building blocks" made from glass or…
Built on the tenets of rational thermodynamics, this article proposes a theory of strain gradient thermo-visco-plasticity for isotropic polycrystalline materials under high strain rates. The effect of micro-inertia, which arises due to…
A general model is formulated for elasto-plastic materials undergoing linear kinematic hardening to describe microstructure evolution associated with phase transformations. Using infinitesimal strain theory, the model is based on…
Size-dependence of plastic flow is studied by discrete dislocation dynamical simulation of systems with various numbers of interacting linear edge dislocations while the stress is slowly increased. Regions between avalanches in the…
3D-printed digital materials whose mechanical behavior travels between those from thermoplastic to rubbery polymers have become increasingly important. However, their mechanical functionalities have not been fully exploited due to intrinsic…
Plasticity is inherent to many engineering materials such as metals. While it can degrade the load-carrying capacity of structures via material yielding, it can also protect structures through plastic energy dissipation. To fully harness…
The concept of concurrent material and structure optimization aims at alleviating the computational discovery of optimum microstructure configurations in multiphase hierarchical systems, whose macroscale behavior is governed by their…
It is shown here that fracture after a brief plastic strain, typically of a few percents, is a necessary consequence of the polycrystalline nature of the materials. The polycrystal undergoing plastic deformation is modeled as a flowing…
In this paper, we investigate some micromechanical aspects of elasto-plasticity in heterogeneous geomaterials. The aim is to upscale the elasto-plastic behavior for a representative volume of the material which is indeed a very challenging…
We design, fabricate and test heterogeneous architected polycrystals, composed of hard plastomers and soft elastomers, which thus show outstanding mechanical resilience and energy dissipation simultaneously. Grain boundaries that separate…
We reformulate the theory of polycrystalline plasticity, in externally driven, nonequilibrium situations, by writing equations of motion for the flow of energy and entropy associated with dislocations. Within this general framework, and…
Supersonic turbulence is a large reservoir of suprathermal energy in the interstellar medium. Its dissipation, because it is intermittent in space and time, can deeply modify the chemistry of the gas. We further explore a hybrid method to…
Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show,…
We employ a mathematical model to analyze stress chains in thermoplastic elastomers (TPEs) with a microphase-separated spherical structure composed of triblock copolymers. The model represents stress chains during uniaxial and biaxial…
Microstructured materials, such as architected metamaterials and phononic crystals, exhibit complex wave propagation phenomena due to their internal structure. While full-scale numerical simulations can capture these effects, they are…
Filamentous bio-materials such as fibrin or collagen networks exhibit an enormous stiffening of their elastic moduli upon large deformations. This pronounced nonlinear behavior stems from a significant separation between the stiffnesses…
While crack nucleation and propagation in the brittle or quasi-brittle regime can be predicted via variational or material-force-based phase field fracture models, these models often assume that the underlying elastic response of the…
Understanding the relationship between micromechanics and macroscopic plastic deformation is vital for elucidating the deformation mechanism of amorphous solids, such as granular materials. In this study, we directly measure T1 events,…
Open cellular solids usually possess random microstructures that may contain a characteristic length scale, such as the cell size. This gives rise to size dependent mechanical properties where large systems behave differently from small…