相关论文: Amorphous shear bands in crystalline materials as …
It has long been thought that shear band (SB) formation in amorphous solids initiates from relatively 'soft' regions in the material in which large-scale non-affine deformations become localized. The test of this hypothesis requires an…
Amorphous solids display a ductile to brittle transition as the kinetic stability of the quiescent glass is increased, which leads to a material failure controlled by the sudden emergence of a macroscopic shear band in quasi-static…
The fundamental instability responsible for the shear localization which results in shear bands in amorphous solids remains unknown despite enormous amount of research, both experimental and theoretical. As this is the main mechanism for…
The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable.…
The formation of shear bands in amorphous solids such as glasses has remained an open question in our understanding of condensed matter and amorphous materials. Unlike in crystals, well-defined topological defects such as dislocations have…
Plasticity in soft amorphous materials typically involves collective deformation patterns that emerge upon intense shearing. The microscopic basis of amorphous plasticity has been commonly established through the notion of "Eshelby"-type…
Granular materials react to shear stresses differently than do ordinary fluids. Rather than deforming uniformly, materials such as dry sand or cohesionless powders develop shear bands: narrow zones containing large relative particle motion…
The response of glasses to mechanical loading often leads to the formation of inhomogeneous flow patterns that strongly affect materials properties. Among them, shear bands are ubiquitous in a wide variety of materials, ranging from soft…
The effect of periodic shear on strain localization in disordered solids is investigated using molecular dynamics simulations. We consider a binary mixture of one million atoms annealed to a low temperature with different cooling rates and…
Understanding the fundamental mechanisms behind plastic instabilities and shear band formation in amorphous media under applied deformation remains a long-standing challenge. Leveraging on the mathematical concept of topology, we revisit…
A shear band of finite length, formed inside a ductile material at a certain stage of a con- tinued homogeneous strain, provides a dynamic perturbation to an incident wave field, which strongly influences the dynamics of the material and…
The shear-transformation-zone (STZ) theory of plastic deformation predicts that sufficiently soft, non-crystalline solids are linearly unstable against forming periodic arrays of microstructural shear bands. A limited nonlinear analysis…
Shear banding is a fundamental non-equilibrium phenomenon in amorphous solids. Due to the intrinsic entangling of three local atomic motions: shear, dilatation and rotation, the precise physical process of shear band emergence is still an…
Seemingly identical Bulk Metallic Glasses (BMG) often exhibit strikingly different mechanical properties despite having the same composition and fictive temperature. A postulated mechanism underlying these differences is the presence of…
We investigate the effect of annealed disorder on the mechanical properties and plasticity of a modeled amorphous solid by introducing a small fraction of heavy impurities into the material which resembles real experimental systems. The…
We deform, in pure shear, a thin sample of Cu$_{50}$Zr$_{50}$ metallic glass using a molecular dynamics simulation up to, and including, failure. The experiment is repeated ten times in order to have average values and standard deviations.…
We numerically investigate the athermal creep deformation of amorphous materials having a wide range of stability. The imposed shear stress serves as the control parameter, allowing us to examine the time-dependent transient response…
A wide range of materials can exist in microscopically disordered solid forms, referred to as amorphous solids or glasses. Such materials -- oxide glasses and metallic glasses, to polymer glasses, and soft solids such as colloidal glasses,…
Widespread processes in nature and technology are governed by the dynamical transition whereby a material in an initially solid-like state then yields plastically. Major unresolved questions concern whether any material will yield smoothly…
Failure of amorphous solids is fundamental to various phenomena, including landslides and earthquakes. Recent experiments indicate that highly plastic regions form elongated structures that are especially apparent near the maximal shear…