相关论文: Structure formation and thermal conduction in poly…
This project is focused on investigating the structural performance of parts and structures produced using the latest additive manufacturing techniques. For additive manufacturing of test coupons, fused deposition modeling of…
In this work, we report the thermal characterization of platelike composite samples made of polyester resin and magnetite inclusions. By means of photoacoustic spectroscopy and thermal relaxation, the thermal diffusivity, conductivity and…
3D printing is rapidly becoming an effective means of prototyping and creating custom consumer goods. The most common method for printing a polymer melt is fused filament fabrication (FFF), and involves extrusion of a thermoplastic material…
Presented study concerns the possibility of evaluation of interfacial thermal resistance (ITR) between the constituents in composite materials with the use of flash technique. Two variants of such measurement are considered, the first of…
Heat transfer simulations of the fused filament fabrication process are an important tool to predict bonding, residual stresses and strength of 3D printed parts. But in order to capture the significant thermal gradients that occur in the…
Materials with complex inner structure can be challenging to characterize in an effective way. First, it is difficult to determine the representative volume for such a heterogeneous material. Second, the effective material parameters…
In this paper we study the thermal effective behaviour for 3D multiphase composite material consisting of three isotropic phases which are the matrix, the inclusions and the coating media. For this purpose we use an accelerated FFT-based…
In this work, we study the thermal transport properties of platelike composite two-layer samples made of polyester resin and magnetite inclusions. By means of photoacoustic spectroscopy and thermal relaxation, their effective thermal…
In this article we discuss in detail the effective approaches to enhance the thermal conductivity in polymer composites. It is shown from numerical simulations that maximizing interfacial area between filler and polymer enhances very…
Fused Filament Fabrication is an additive manufacturing technique in which molten thermoplastic polymers are extruded through a nozzle. Therefore, the interplay between the viscoelastic nature of the polymer melt, temperature, printing…
Fiber-reinforced polymer composite (FRPC) materials are used extensively in various industries, such as aerospace, automobiles, and electronics packaging, due to their remarkable specific strength and desirable properties, such as enhanced…
Fused Deposition Modeling (FDM) is one of the most widely explored additive manufacturing method that uses thermoplastic materials to manufacture products. Mechanical properties of parts manufactured using FDM are influenced by different…
Fiber reinforced polymer composite (FRPC) materials are extensively used in lightweight applications due to their high specific strength and other favorable properties including enhanced endurance and corrosion resistance. However, these…
High-aspect-ratio polymer materials are widely utilized in applications ranging from everyday materials such as clothing to specialized equipment in industrial and medical fields. Traditional fabrication methods, such as extrusion and…
We report the results of an experimental study of thermal and magnetic properties of nanostructured ferrimagnetic iron oxide composites with graphene and graphite fillers synthesized via the current activated pressure assisted…
Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), Thermo Mechanical…
We follow the dynamics of an ensemble of interacting self-propelled semi-flexible polymers in contact with a thermal bath. We characterize structure and dynamics of the passive system and as a function of the motor activity. We find that…
The excellent structural and piezoresistive properties of continuous carbon fiber make it suitable for both structural and sensing applications. This work studies the use of 3D printed, continuous carbon fiber reinforced beams as…
In this publication we describe the extrusion process and the properties of polymer-bonded anisotropic SrFe$_\text{12}$O$_\text{19}$ filaments for fused filament fabrication (FFF). Highly filled polyamide 12 filaments with a filling…
Frontal Polymerization (FP) was recently demonstrated as a faster, more energy-efficient way to manufacture fiber-reinforced thermosetting-polymer-matrix composites. FP uses heat from the exothermic reaction of the solution of monomer and…