相关论文: Microlayer in nucleate boiling seen as Landau-Levi…
The evaporation of vapor bubbles inside a microchannel is important to realize a device with high cooling performance. The liquid film formed on the solid surface is essential for evaporative heat transfer from solid to fluid; its formation…
In this article, we present direct numerical simulation results for the expansion of spherical cap bubbles attached to a rigid wall due to a sudden drop in the ambient pressure. The critical pressure drop beyond which the bubble growth…
The transition from nucleate to film boiling on micro/nano textured surfaces is of crucial importance in a number of practical applications, where it needs to be avoided to enable safe and efficient heat transfer. Previous studies have…
The interfacial resistance to evaporation, in particular for the case of water, is a longstanding issue. The previous data on its main characterizing parameter, the accommodation coefficient, manifest a dispersion over three orders of…
A new two-layer model has been proposed to study microscale heat transfer associated with a developing flow boundary layer. As an example, a cold, microscale film of liquid impinging on an isothermal hot, horizontal surface has been…
Flow boiling within microchannels is an efficient heat removal mechanism by utilizing the latent heat of the fluid. Numerical simulations can resolve the small temporal and spatial scales of the vapor bubbles in the flow boiling process,…
Understanding the nucleation and growth dynamics of the surface bubbles generated on a heated surface can benefit a wide range of modern technologies, such as the cooling systems of electronics, refrigeration cycles, nuclear reactors and…
Vapor bubbles are formed in liquids by two mechanisms: evaporation (temperature above the boiling threshold) and cavitation (pressure below the vapor pressure). The liquid resists in these metastable (overheating and tensile, respectively)…
Flow boiling in microchannel heat sinks is an efficient way to dissipate high heat flux by utilizing the large surface-to-volume ratio and high latent heat. Previous studies of boiling heat transfer in microchannels mainly consider the…
When a drop impacts at very low velocity onto a pool surface it is cushioned by a thin layer of air, which can be stretched into a hemispheric shape. We use ultra-high-speed video imaging to show how this thin air-layer ruptures. The number…
Boiling is a very efficient way to transfer heat from a heater to the liquid carrier. We discuss the boiling crisis, a transition between two regimes of boiling: nucleate and film boiling. The boiling crisis results in a sharp decrease in…
Microfluidics technology offers high efficiency of heat and mass transfer and low safety hazards compared to conventional multiphase processes. The multiphase flow in the microchannels is usually characterized as Taylor flow that includes…
A theoretical model is developed for the forced convection film boiling phenomenon over a heated sphere moving vertically downwards in the water. Unprecedented to the previous analytical studies, this model accounts for the buoyancy effects…
Close to the triple point, the surface of ice is covered by a thin liquid layer (so-called quasi-liquid layer) which crucially impacts growth and melting rates. Experimental probes cannot observe the growth processes below this layer, and…
Recently, we demonstrated that the local heating of degassed water can generate water vapor microbubbles and induce a rapid flow around the bubble. Although flow generation involves the self-excited oscillation of bubbles at a local heating…
We report about an intriguing boiling regime occurring for small heaters embedded on the boundary in subcooled water. The microheater is realized by focusing a continuous wave laser beam to about $10\,\mu$m in diameter onto a 165\,nm-thick…
Joule heat generated by resistive elements of cryogenic micro- and nanodevices often originates boiling of the cooling cryogenic liquids (helium, nitrogen). The article proposes an experimental method to explore the dynamics of the…
Boiling crisis is a transition between nucleate and film boiling. In this communication we present a physical model of the boiling crisis based on the vapor recoil effect. Our numerical simulations of the thermally controlled bubble growth…
Thermocavitation, the creation of a vapor bubble by heating a liquid with a continuous-wave laser, has been studied for a wide range of applications. Examples include the development of an actuator for needle-free jet injectors, as the…
The study of vapor bubble growth following droplet vaporization in a superheated liquid involves research areas such as hydrodynamics, heat transfer, mass transfer, and thermodynamics. The interplay between these multiscale aspects is…