相关论文: Shock induced atomisation of a liquid metal drople…
The secondary atomization of liquid droplets is a common physical phenomenon in many industrial and engineering applications. Atomization in high speed compressible flows is less well understood than its more frequently studied low Mach…
Droplet atomization through aerobreakup is omnipresent in various natural and industrial processes. Atomization of Newtonian droplets is a well-studied area; however, non-Newtonian droplets have received less attention despite their…
Droplet formation is relevant in many applications spanning natural and artificial settings. A physical understanding of aerobreakup or air-assisted secondary atomization and predicting size distributions in these applications is…
Aerobreakup of fluid droplets under the influence of impulsively generated high-speed gas flow using an open-ended shock tube is studied using experiments and numerical simulations. Breakup of mm-sized droplets at high Weber number was…
There is a need for experimental data in conditions representative injection in rocket engines to validate or initiate droplet formation models used in numerical simulations. A new cryogenic vessel was built upon the MASCOTTE test bench to…
Bag breakup of drops has been a subject of interest for almost over a century. Several issues such as theoretical estimation of the regime boundary marking the onset of such breakup, bag growth rates, drop size distribution, and the effect…
An experimental investigation of secondary atomization of spray in plain-jet airblast atomizers with a circular array of six liquid jets is studied. Crossflow of air with controlled velocity and pressure is applied to transverse jets. The…
Detonation-based propulsion devices, such as rotating detonation engines (RDEs), must be able to leverage the higher energy densities of liquid fuels in order for them to be utilized in practical contexts. This necessitates a comprehensive…
In this article, the fluid dynamics of room temperature liquid metal (RTLM) droplet impacting onto a pool of the same liquid in ambient air was investigated. A series of experiments were conducted in order to disclose the influence of the…
The droplet and flame chemiluminescence dynamics as well as their coupling during atomization events of graphene oxide doped diesel are investigated experimentally. The tested doping concentrations are 0, 0.001, 0.005, 0.01, and 0.02% by…
With exposure to air, many liquid metals spontaneously generate an oxide layer on their surface. In oscillatory rheological tests, this skin is found to introduce a yield stress that typically dominates the elastic response but can be tuned…
The phenomenon of liquid-gas phase transition occurring in heavy ion collisions at intermediate energies is a subject of contemporary interest. In statistical models of fragmentation, the liquid drop model is generally used to calculate the…
In the present paper, experimental and numerical studies of interaction between different liquid droplets with different hot metal surfaces had been carried out and the obtained results were interpreted using graphs and pictures. Droplet…
We report the dynamics of a droplet levitated in a single-axis acoustic levitator. The deformation and atomization behavior of the droplet in the acoustic field exhibits a myriad of complex phenomena, in sequences of steps. These include…
A thorough numerical, theoretical and experimental investigation of the liquid atomization in a full cone pressure swirl nozzle is presented. The first part is devoted to the study of the inner flow. CAD and CFD software are used in order…
Boger fluids are viscoelastic liquids having constant viscosity for a broad range of shear rates. They are commonly used to separate the effects of liquid elasticity from viscosity in any experiment. We present an experimental study on the…
The vaporization of a freely moving drop in a uniform, high-temperature gas stream is investigated through direct numerical simulation. The incompressible Navier-Stokes equations with surface tension and phase change are solved in…
The aerodynamic breakup of a polymeric droplet in the bag breakup regime is investigated experimentally and compared with the result of the Newtonian droplet. To understand the effect of liquid elasticity, the Weber number is kept fixed…
Nuclear liquid-gas phase transitions are investigated in the framework of static antisymmetrized molecular dynamics (static AMD) model under either a constant volume or a constant pressure. A deuteron quadrupole momentum fluctuation…
Injectors of cryogenic liquid rocket engines produce large polydisperse and dense sprays due to the pressure and mass flow conditions. Atomization is the dominating process that drives the flame behaviour in cryogenic jet flames, when the…