相关论文: Mechanism of laser induced self-organized void arr…
This study investigated multi-void formation in fused silica using high resolution Finite-Difference-Time-Domain (FDTD) simulations. Despite extensive research dedicated to understanding the mechanisms behind multi-void formation in…
In this paper, several experiments were conducted to further clarify the formation mechanism of self organized void array induced by a single laser beam, including energy-related experiments, refractive-index-contrast-related experiments,…
Polydimethylsiloxane (PDMS) is a widely used organosilicon polymer often employed in formulations with fine oxide particles for various high temperature applications. Although PDMS is considered to be thermally stable and chemically inert,…
We present a comprehensive study of voids formation, nucleation and growth in a prototype model of binary alloys subjected to irradiation by using a combined approach based on phase field and rate theories. It is shown that voids formation…
Polydimethylsiloxane (PDMS) microfluidic devices have become a standard tool for engineering cells and multicellular networks in vitro. However, the reservoirs, or through-holes where cells access the devices, are usually fabricated…
We report on the generation of multi-wavelength dissipative soliton (DS) in an all normal dispersion fiber laser passively mode-locked with a semiconductor saturable absorber mirror (SESAM). We show that depending on the strength of the…
One of the remarkable capabilities of ultrashort polarized laser pulses is the generation of laser-induced periodic surface structures (LIPSS). The origin of this phenomenon is largely attributed to the interference of the incident laser…
In this work, we focus on the fabrication of highly uniform laser-induced periodic surface structures (LIPSS) on bulk polycarbonate (PC) using 258 nm femtosecond laser pulses. A systematic approach was pursued to investigate the influence…
The high UV laser dose at 193 nm induces grooves on poly allyl diglycol carbonate PADC (CR39) at normal irradiation. The spatial period exhibits to be nearly invariant for azimuth and polar angles indicating a loose dependence on the…
Pulse formation in passively mode locked lasers is often accompanied with dispersive waves that form of spectral sidebands due to spatial inhomogoneities in the laser cavity. Here we present an explicit calculation of the amplitude,…
We address the generation and interaction of dispersion-managed dissipative solitons (DMDS) in a model of fiber lasers with the cubic-quintic nonlinearity, multiphoton absorption and gain dispersion. Both anomalous and normal segments of…
In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases and mixtures, argon, argon plus water…
Femtosecond pulsed lasers have been widely used over the past decades for precise materials structuring at the micro- and nano- scales. In order, though, to realize efficient material processing and account for the formation of laser…
Time-resolved diffraction microscopy technique has been used to observe the formation of laser-induced periodic surface structures (LIPSS) from the interaction of a single femtosecond laser pulse (pump) with a nano-scale groove mechanically…
We have developed a poly(dimethylsiloxane) (PDMS) microfluidic chip to study the directional drying of a colloidal dispersion confined in a channel. Our measurements on a dispersion of silica nanoparticles once again revealed the…
We report the engineering of air-voids embedded in GaAs-based photonic crystal surface emitting lasers realised by metalorganic vapour-phase epitaxy regrowth. Two distinct void geometries are obtained by modifying the photonic crystal…
We studied complex lasing pattern formations in a thin-slice solid-state laser with wide-aperture laser-diode end-pumping. Radial and rectangular vortex arrays were found to be formed in a controlled fashion with symmetric and asymmetric…
The polymer nanocomposites find applications in diverse areas ranging from smart materials to bioengineering. They are developed by dispersion of nanomaterials in a bulk phase of a polymeric material. Although several methods facilitate…
A comparative study is performed to explore the periodic structure formation upon intense femtosecond pulsed irradiation of dielectrics with radially and azimuthally polarised beams. Laser conditions have been selected appropriately to…
Plasmonic nanoparticles embedded into a solid matrix could play crucial role in laser-matter interactions. In this study, excess energy creation was observed during the single-shot irradiation of a polymer matrix containing plasmonic gold…