相关论文: Phase Calibration of Distributed Antenna Arrays
Connected radio interferometers are sometimes used in the tied-array mode: signals from antenna elements are coherently added and the sum signal applied to a VLBI backend or pulsar processing machine. Usually there is no computer-controlled…
The design and experimental implementation of a waveform for high-accuracy inter-node ranging in a coherent distributed antenna array is presented. Based on a spectrally-sparse high-accuracy ranging waveform, the presented multi-frequency…
The synthesis of antenna arrays in presence of mutual coupling using generalized scattering matrices in terms of characteristic modes is proposed. For the synthesis, the array is built of synthetic elements that are described by their modal…
Synchronization of transceiver chains is a major challenge in the practical realization of massive MIMO and especially distributed massive MIMO. While frequency synchronization is comparatively easy to achieve, estimating the carrier phase…
Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a newly introduced architecture that enables both spatial multiplexing and beamforming while facilitating highly reconfigurable hardware implementation in…
Dual-function radar communications (DFRC) systems have recently been proposed to enable the coexistence of radar and wireless communications, which in turn alleviates the increased spectrum congestion crisis. In this paper, we consider the…
Various compositions of sparsely polarized antenna arrays are proposed in this paper to estimate the direction-of-arrivals (DOAs) and polarizations of multiple coherent sources. These polarized antenna arrays are composed of one of the…
The design of an interferometric array should allow optimal instrumental response regarding all possible source positions, times of integration and scientific goals. It should also take into account constraints such as forbidden regions on…
The $K\times 2$ and $2\times K$, Multiple-Input Multiple-Output (MIMO) X channel with constant channel coefficients available at all transmitters and receivers is considered. A new alignment scheme, named \emph{layered interference…
Increasing the number of transmit and receive elements in multiple-input-multiple-output (MIMO) antenna arrays imposes a substantial increase in hardware and computational costs. We mitigate this problem by employing a reconfigurable MIMO…
Channel estimation is essential for precoding/combining in millimeter wave (mmWave) communications. However, accurate estimation is usually difficult because the receiver can only observe the low-dimensional projection of the received…
This paper presents a novel planar phased array that can work in Ka band designed for two-dimensional scanning. A four-modes pattern reconfigurable element based on microstrip Yagi antenna is proposed, and then developed into the 4X4 phased…
Antenna arrays have many applications in direction-of-arrival (DOA) estimation. Sparse arrays such as nested arrays, super nested arrays, and coprime arrays have large degrees of freedom (DOFs). They can estimate large number of sources…
Here we will discuss which calibrations are needed, how to perform them and how the calibration affect ALMA observations. This first part concentrates on aspects related to a single antenna, namely antenna pointing (including the antenna…
In most multiple-input multiple-output (MIMO) communication systems, e.g., Massive MIMO, the antenna spacing is generally no less than half a wavelength. It helps to reduce the mutual coupling and therefore facilitate the system design. The…
The fundamental mechanism driving MIMO beamforming is the relative phases of signals departing the transmit array and arriving at the receive array. If a propagation channel affects all transmitted signals equally, the relative phases are a…
Distributed transmit beamforming is a technique that adjusts the signals from cooperating radios to combine coherently at a destination radio. To achieve coherent combining, the radios can exchange preambles with the destination for…
In millimeter-wave communications (MMWC), in order to compensate for high propagation attenuation, phased arrays are favored to achieve array gain by beamforming, where transmitting and receiving antenna arrays need to be jointly trained to…
In most multiple-input multiple-output (MIMO) communication systems, antennas are spaced at least half a wavelength apart to reduce mutual coupling. In this configuration, the maximum array gain is equal to the number of antennas. However,…
Increasing data volumes delivered by a new generation of radio interferometers require computationally efficient and robust calibration algorithms. In this paper, we propose distributed calibration as a way of improving both computational…