相关论文: Full-Stack End-To-End mmWave Simulations Using 3GP…

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless…

Wide Area Monitoring Systems (WAMS) utilizing synchrophasor measurements is considered one of the essential parts in smart grids that enable system operators to monitor, operate, and control power systems in wide geographical area. On the…

Leveraging the multilayer realization of programmable metasurfaces, stacked intelligent metasurfaces (SIM) enable fine-grained wave-domain control. However, their wideband deployment is impeded by two structural factors: (i) a single,…

5G millimeter wave (mmWave) cellular networks have been reported to deliver 1-2 Gbps downlink throughput, via speed-tests. However, these speed-tests capture only a few seconds of throughput and are not representative of sustained…

A novel unified framework of geometry-based stochastic models (GBSMs) for the fifth generation (5G) wireless communication systems is proposed in this paper. The proposed general 5G channel model aims at capturing small-scale fading channel…

The analysis of the end-to-end behavior of novel mobile communication methods in concrete evaluation scenarios frequently results in a methodological dilemma: Real world measurement campaigns are highly time-consuming and lack of a…

Wireless channels in motion-rich urban microcell (UMi) settings are non-stationary; mobility and scatterer dynamics shift the distribution over time, degrading classical and deep estimators. This work proposes conditional prior diffusion…

Multi-user multiple-input, multiple-output (MU-MIMO) designs can substantially increase wireless systems' achievable throughput and connectivity capabilities. However, existing MU-MIMO deployments typically utilize linear processing…

Due to sophisticated deployments of all kinds of wireless networks (e.g., 5G, Wi-Fi, Bluetooth, LEO satellite, etc.), multiband signals distribute in a large bandwidth (e.g., from 70 MHz to 8 GHz). Consequently, for network monitoring and…

To support the high data rates for latency-critical applications, future wireless systems will employ fully digital beamforming multiple-input multiple-output (MIMO) architectures at millimeter wave (mmWave) frequencies. Moreover, mmWave…

In this paper, we adopt a three-stage based uplink channel estimation protocol with reduced pilot overhead for an reconfigurable intelligent surface (RIS)-aided multi-user (MU) millimeter wave (mmWave) communication system, in which both…

The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one…

This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural…

Sixth generation (6G) cellular systems are expected to extend the operational range to sub-Terahertz (THz) frequencies between 100 and 300 GHz due to the broad unexploited spectrum therein. A proper channel model is needed to accurately…

This paper proposes a machine learning-assisted channel estimation approach for massive MIMO systems, leveraging DNNs to outperform traditional LS and MMSE methods. In 5G and beyond, accurate channel estimation mitigates pilot contamination…

Massive multiple-input multiple-output (MIMO) is a fundamental enabler to provide high data throughput in next generation cellular networks. By equipping the base stations (BSs) with tens or hundreds of antenna elements, narrow and high…

Reconfigurable Intelligent Surfaces (RISs) are a promising technique for enhancing the performance of Next Generation (NextG) wireless communication systems in terms of both spectral and energy efficiency, as well as resource utilization.…

Nyquist Signaling Modulations (NSMs) are a new signaling paradigm inspired by faster-than-Nyquist principles but based on a distinct approach that enables controlled inter-symbol interference through carefully designed…

This letter investigates the challenge of channel estimation in a multiuser millimeter-wave (mmWave) time-division duplexing (TDD) system. In this system, the base station (BS) employs a multi-antenna uniform linear array (ULA), while each…

There has been an exponential increase in the usage of multimedia services in mobile networks in recent years. To address this accelerating data demand, mobile networks are experiencing a subtle transformation in their architecture. One of…