相关论文: Extracting optical parameters of Cu-Mn-Fe spinel o…
High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat towards cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency…
Optical absorption spectra of nanocrystalline cupric oxide CuO samples, obtained using the converging spherical shock wave procedure, reveal significant spectral weight red-shift as compared with spectra of single crystalline CuO samples.…
A galvanic displacement reaction-based, room-temperature "dip-and-dry" technique is demonstrated for fabricating selectively solar-absorbing plasmonic nanostructure-coated foils (PNFs). The technique, which allows for facile tuning of the…
In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the…
Nanoparticle (NP) arrays of noble metals strongly absorb light in the visible to infrared wavelengths through resonant interactions between the incident electromagnetic field and the metal's free electron plasma. Such plasmonic interfaces…
Recently, a homogenization procedure has been proposed, based on the tight lower bounds of the Bergman-Milton formulation, and successfully applied to dilute ternary nanocomposites to predict optical data without using any fitting…
Cu-based chalcogenides are promising materials for thin-film solar cells with more than 20% measured cell efficiency. Using first-principles calculations based on density functional theory, the optoelectronic properties of a group of…
This work experimentally studies silicon-cored tungsten nanowire selective metamaterial absorber to enhance solar-thermal energy harvesting, simply fabricated by conformally coating a thin tungsten layer onto a commercial silicon nanowire…
The ideal band gap for a photovoltaic active layer for the solar spectrum is around 1.3 eV. However oxides with such values are rare. One of the most studied oxides to date as a photovoltaic active layer is the cuprous oxide Cu2O. Its band…
The field of nano-optics has grown with plasmonic metals. Metals such as silver, gold, and copper nanoparticles, can concentrate electromagnetic (EM) fields at the nanoscale, due to the special property called localized surface plasmon…
By means of the first-principles density functional theory (DFT), I2-II-IV-VI4 type Cu-based quaternary chalcogenides Cu 2 XSiS 4 (X = Ge, Sn, and Pb) have been thoroughly investigated. We report the study of Ge and Sn substitution in the…
We present a theoretical approach, for the first time, to investigate optical and photothermal properties of high-entropy alloy nanoparticles with a focus on FeCoNi-based alloys. We systematically analyze the absorption spectra of spherical…
Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely…
Manganese ferrite (MnFe2O4) and copper doped manganese ferrite (Mn0.75Cu0.25Fe2O4) soft materials were synthesized through solid-state sintering method. The phase purity and quality were confirmed from x-ray diffraction patterns. Then the…
Material absorption is a key limitation in nanophotonic systems; however, its characterization is often obscured by scattering and diffraction loss. Here we show that nanomechanical frequency spectroscopy can be used to characterize the…
Spin coating technique was used to synthesize pure ZnO and Cu doped ZnO films on amorphous and conducting glass substrates. The doped amount of Cu in ZnO was varied up to 5% in atomic percentage. Speed of spin coating system, coating time,…
Co$_3$O$_4$, ZnFe$_2$O$_4$, CoFe$_2$O$_4$, ZnCo$_2$O$_4$, and Fe$_3$O$_4$ thin films were fabricated by pulsed laser deposition at high and low temperatures resulting in crystalline single-phase normal, inverse, as well as disordered spinel…
The Cu nanowires were electrodeposited in polycarbonate track-etched (PCT) membrane. SEM, TEM and XPS techniques were used to characterize the morphology, structure and size of nanowires as well as chemical Composition. The absorption…
In this paper, we study the solar selective absorbing properties of metal nanowire array (NWA) / anodic aluminum oxide (AAO) composites at 1000 K via numerical simulation. The materials and structural parameters which influence the…
Multiferroic compounds have gained research attention in the field of ferroelectric photovoltaics due to the presence of transition-metal d states from magnetic ions, which tend to reduce the bandgap value. In this work,…