相关论文: Stepped-height ridge waveguide MQW polarization mo…

We report an AlGaInAs multiple quantum well integrated source of polarization controlled light consisting of a polarization mode converter PMC, differential phase shifter(DPS), and a side wall grating distributed-feedback DFB laser. We…

We present the first demonstration of a 1550 nm multi-wavelength distributed feedback (MW-DFB) laser employing a third-order, four-phase-shifted sampled sidewall grating. By utilizing linearly chirped sampled gratings and incorporating…

The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…

Optical microcavities with rotational symmetry have been widely used for narrowing linewidth and reducing frequency noise, however, the narrow but wavelength dependent optical feedback restricts the narrow linewidth laser works only at some…

Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth…

techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For…

This paper reports the achievement of 120W single-frequency narrow linewidth 1018nm laser based on wide-tunable DBR fiber seed source. The DBR structure seed source uses 8mm long doped optical fibers with a line width of 3.25k. The…

We demonstrate a high-performance, single-mode Er:Ta2O5 microring laser monolithically integrated on a silicon platform via a customized Damascene process. The Er:Ta2O5 gain medium exhibits a low propagation loss of 0.73 dB/cm and a high…

InAs/GaAs quantum dot (QD) distributed feedback (DFB) lasers are promising candidates for next-generation photonic integrated circuits. We present a design that incorporates an oxidized aperture confined surface grating (OASG) structure,…

We demonstrate a one-dimensional optical phased array on an integrated silicon platform for operation at 1.55 microns. Light is emitted end-fire from the chip edge where the waveguides are terminated. The innovative design and high…

This study proposes and experimentally demonstrates a distributed feedback (DFB) laser with a distributed phase shift (DPS) region at the center of the DFB cavity. By modeling the field intensity distribution in the cavity and the output…

Electrically-pumped lasers directly grown on silicon are key devices interfacing silicon microelectronics and photonics. We report here, for the first time, an electrically-pumped, room-temperature, continuous-wave (CW) and single-mode…

Generating widely tunable, continuous wave light at long wavelengths via difference frequency generation (DFG) remains challenging due to high absorption and dispersion. The relatively new platform of thin film lithium niobate enables…

We propose and demonstrate a hybrid waveguide platform using layered amorphous silicon and silicon nitride. The waveguide offers more degrees of freedom to design waveguides with desired confinement, effective index and polarization…

Quasi-bound states in the continuum (q-BICs) enable low-threshold lasing through high-Q cavity modes, yet their polarization tunability remains constrained by nanostructure-imposed cavity symmetries. By engineering a microcavity with an…

This work reports a fully guided setup for single-mode squeezing generation on integrated titanium-indiffused periodically poled nonlinear resonators. A continuous wave laser beam is delivered and the squeezed field is collected by…

In this paper, a novel method to enhance Frequency Modulated Continuous Wave (FMCW) THz imaging resolution beyond its diffraction limit is proposed. Our method comprises two stages. Firstly, we reconstruct the signal in depth-direction…

Polarization-compatible receivers are indispensable in transceivers used for wavelength division multiplexing (WDM) optical communications, as light polarization is unpredictable after transmission through network fibers. However, the…

We experimentally demonstrate the realization of a half-polarization-maintaining (half-PM) fiber laser, in which mode-locking is provided by a reflective multimode-interference saturable absorber (SA). In the specially designed SA, linearly…

An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in…