相关论文: Validation of the Reference Impedance in Multiline…

This paper proposes a modification to the traditional multiline thru-reflect-line (TRL) or line-reflect-line (LRL) calibration method used for vector network analyzers (VNAs). Our proposed method eliminates the need for a thru (or line)…

This paper presents an analysis and rigorous procedure for determining the optimal lengths of line standards in multiline thru-reflect-line (TRL) calibration of vector network analyzers (VNAs). The solution is obtained through nonlinear…

We introduce an improved microwave calibration method for use in a cryogenic environment, based on a traditional three-standard calibration, the Thru-Reflect-Line (TRL) calibration. The modified calibration method takes advantage of…

While in a triggered experiment the matching of the RPC transmission line impedance with the one of the front-end electronics is less critical, for a trigger-less data recording this becomes mandatory. As expected, impedance matching is not…

We outline calibrated measurements of the microwave reflection coefficient from the tunnel junction of an ultra-high vacuum low temperature scanning tunneling microscope. The microwave circuit design is described in detail, including an…

A fundamental pursuit of microwave metrology is the determination of the characteristic impedance profile of microwave systems. Among other methods, this can be practically achieved by means of time-domain reflectometry (TDR) that measures…

Reflection measurements give access to the complex impedance of a material on a wide frequency range. This is of interest to study the dynamical properties of various materials, for instance disordered superconductors. However reflection…

In many cases beam coupling impedances or wake fields are calculated with computer simulator such as CST Studio Suite, GdfidL Electromagnetic Field Simulator and so on. But evaluation with the stretched-wire method is still very useful by…

Impedance-based small-signal stability analysis is widely applied in practical engineering with modular multilevel converters (MMCs). However, the deficiencies of existing impedance models (IMs) and the idealized extension for the single…

The characteristic frequencies of a system provide important information on the phenomena that govern its physical properties. In this framework, there has recently been renewed interest in cryogenic microwave characterization for condensed…

A method is proposed and experimentally explored for in-situ calibration of complex transmission data for superconducting microwave resonators. This cryogenic calibration method accounts for the instrumental transmission response between…

Due to the need for higher reliability and performance from RF circuits, multi-port reflectometers are increasingly used as low-overhead impedance monitors. In this work, using periodic structures as multi-ports is proposed. Periodic…

Measurements and design equations for a two section impedance transforming hybrid suitable for MMIC applications and a new method of synthesis for multisection branch-line hybrids are reported. The synthesis method allows the response to be…

Modular multilevel converter (MMC) has complex topology, control architecture and broadband harmonic spectrum. For this, linear-time-periodic (LTP) theory, covering multi-harmonic coupling relations, has been adopted for MMC impedance…

This article proposes a source-independent method for detecting faults along Transmission Lines (TL) to reduce the protection issues arising from Inverter-Based Resources (IBRs). In the proposed method, high-frequency waves are sent from…

This paper summarizes the electromagnetic time reversal (EMTR) technique for fault location, and further numerically validates its effectiveness when the fault impedance is negligible. In addition, a specific EMTR model considering the…

Calibration is a key step in the signal processing pipeline of any radio astronomical instrument. The required sky, ionospheric and instrumental models for this step can suffer from various kinds of incompleteness. In this paper we analyze…

This paper discusses the transmission line pulse (TLP) analysis, generally used for electrostatic discharge (ESD) device characterization, as high potential usable tool also for non-ESD structures. TLP technique, combined with DC and pulsed…

Modern machine learning approaches typically identify the impedance of a single inverter-based resource (IBR) and assume similar impedance characteristics across devices. In modern power systems, however, IBRs will employ diverse control…

Flux calibration of spectra in reverberation mapping (RM) is most often performed by assuming the flux constancy of some specified narrow emission lines, which stem from an extended region that is sometimes partially spatially resolved, in…