相关论文: High efficiency holmium-doped triple-clad fiber la…
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with…
A new scheme of a highly efficient hybrid laser cavity is proposed and experimentally demonstrated utilizing a hot cesium (Cs) vapor cell as an optical gain medium. The laser cavity consists of a macroscopic concave reflecting mirror (>99%…
We report on a passively mode-locked Tm, Ho:CLNGG laser operating at 2090 nm, pumped by a multimode fiber-coupled 793 nm laser diode, representing the first demonstration of an affordable diode-pumped sub-100-fs mode-locked laser in the…
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining…
We describe an efficient laser emission from a directly grown Er3+:YAG single-crystal fiber that is resonantly pumped using a continuous-wave (CW) laser diode at 1532 nm. In a longitudinal pumping, it emits 12.5 W at 1645 nm with a slope…
We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber…
A novel method for efficient generation of high power, equalized continuous-wave supercontinuum source in an all conventional silica fiber architecture is demonstrated. Highly nonlinear fiber (HNLF) is pumped in its anomalous dispersion…
Core-clad fibers on the basis of high-purity 1300 ppmw Pr(3+)-doped Ga-Ge-As-Se and 2000 ppmw Pr(3+) -doped In-Ge-As-Se-I glasses have been prepared. The minimum optical losses of the fibers are at the level of 1 dB/m in the wavelength…
Anti-resonant hollow-core fibers (AR-HCFs) have emerged as an important medium for high-power laser delivery due to their low optical nonlinearity and high damage threshold. However, current delivery systems of high-power laser based on…
We demonstrate a new high efficiency architecture for cascaded Raman fiber lasers based on a single pass cascaded amplifier configuration. Conversion is seeded at all intermediate Stokes wavelengths using a multi-wavelength seed source. A…
techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For…
We demonstrate the acousto-optic modulation of a hybrid-lattice hollow core fiber (HL-HCF) for the first time. For many years, optical fibers with reduced diameters have been the main solution to increase the interaction of acoustic and…
A novel mode-locked fiber laser based on offset splicing technology between two kinds of graded index multimode fibers is proposed and experimentally demonstrated. The offset splice spot structure acts as a saturable absorber via nonlinear…
Along a single strand of micro-capillary optical waveguide, we achieved an efficient transfer of the light momentum onto the liquid contained there within, successfully atomizing it into nanoscale droplets. A hollow optical fiber (HOF),…
We report on the eye-safe laser performance of Tm3+-doped calcium fluoride crystals, modified with optically inactive "buffer" cations (Y3+, Lu3+, Gd3+, and La3+), under in-band diode-pumping at 1.68 um. In the free-running regime, the 1.5…
This letter describes the design and operation of a polymer-based third order distributed feed-back (DFB) microfluidic dye laser. The device relies on light-confinement in a nano-structured polymer film where an array of nanofluidic…
We report on an in-band pumped soft-aperture Kerr-lens mode-locked Ho:CALGO bulk laser at 2.1 um, generating 2 W of average power with 112 fs pulses at 91-MHz repetition rate. To the best of our knowledge, this is the highest average power…
Thermal effects are critical constrains for developing high-power thulium-doped fiber lasers (TDFLs). In this paper, we numerically investigate the lasing and thermal characteristics of the TDFLs under different pump transitions. Our…
We report the first demonstration of solid-state optical refrigeration of a Ho-doped material. A 1 mol% Ho-doped Yttrium Lithium Fluoride (YLF) crystal is cooled by mid-IR laser radiation, and its external quantum efficiency and parasitic…
We report on the design of a highly-nonlinear specialty fiber as a mid-infrared light source at 4.3 {\mu}m. A meter length of the designed solid-core chalcogenide based index-guided microstructured optical fiber (MOF) with circular air…