相关论文: Design Challenges in High-Current Pulsed Stripline…
Long-lived light particles (LLLPs) appear in many extensions of the standard model. LLLPs are usually motivated by the observed small neutrino masses, by dark matter or both. Typical examples for fermionic LLLPs (a.k.a. heavy neutral…
A solid-state laser system that produces a 1MHz pulse train of 800 pulses with 18 mJ per pulse at the wavelength of 263.5 nm has been developed to meet the requirements of the TESLA Test Facility (TTF) at Fermilab and in operation since…
This document describes the design of the accelerator and target systems for the AGS Super Neutrino Beam Facility. Under the direction of the Associate Laboratory Director Tom Kirk, BNL has established a Neutrino Working Group to explore…
The High-Luminosity LHC Accelerator Upgrade Project (AUP) in the U.S. will construct quadrupole magnets to be delivered to CERN. An initial 3 tons, over 600 km total length of conductor was procured under the LHC Accelerator R&D Program…
The possibility of making a low cost, very intense (1MW) high energy proton source at the Brookhaven Alternating Gradient Synchrotron (BNL-AGS) along with the forthcoming new large underground detectors (approaching 1 MT in mass) at the…
The baseline design for the High Energy Photon Source has been proposed, with an emittance of 60 pm.rad within a circumference of 1.3 kilometers. Nevertheless, the nonlinear performance of the design needs further improvements to enlarge…
Neutrino Factory is a facility for future precision studies of neutrino oscillations. A so called near detector is essential for reaching the aimed precision of neutrino oscillation analysis. Main task of the near detector is to measure the…
In the framework of the EUROnu design study, a new design for the CERN to Frejus neutrino beam based on the SPL is under development by the WP2 group. The main challenge of this project lies with the design of a multi-MW neutrino beam…
High-energy terahertz pulses are challenging to produce due to the low conversion efficiency and limited optical damage threshold of nonlinear crystals. Here, we describe the high-efficiency generation of terahertz radiation pulses with…
A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the…
The Drive Beam Linac of the Compact Linear Collider (CLIC) has to accelerate an electron beam with 4.2 A up to 2.4 GeV in almost fully-loaded structures. The pulse contains about 70000 bunches, one in every second rf bucket, and has a…
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in…
We investigate the dynamics of interacting magnetic flux lines driven by an external current in the presence of linear pinning centers, arranged either in a periodic square lattice or placed randomly in space, by means of three-dimensional…
We present an optimization of the hadron focusing system for a low-energy high-intensity conventional neutrino beam (Super-Beam) proposed on the basis of the HP-SPL at CERN with a beam power of 4 MW and an energy of 4.5 GeV. The far…
Filamentation has extensively been explored and is well understood at repetition rates <1 kHz due to the typical availability of multi-mJ laser systems at a moderate average power. The advent of high-power Yb-lasers opened new possibilities…
The physics potential of an intense source of low-energy muons is studied. Such a source is a necessary stage towards building the neutrino factories and muon colliders which are being considered at present. The CERN Neutrino Factory could…
A neutron source is proposed. It is based on a proton accelerator with the energy Ep = 1.2 GeV, current Ip = 0.7A, pulse duration T = 3 mcsec, repetition rate F = 60 Hz, and accelerator length L = 30 m. Protons are accelerated by the field…
A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle…
High-intensity high-energy neutrino beams could be produced by exploiting a very intense future muon source, and allowing the muons to decay in a storage ring containing a long straight section. Taking the parameters of muon source designs…
This volume of the LBNF/DUNE Conceptual Design Report cover the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both…