相关论文: Using Loaded N-port Structures to Achieve the Cont…
Modern antenna design for communication systems revolves around two extremes: devices, where only a small region is dedicated to antenna design, and base stations, where design space is not shared with other components. Both imply different…
Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the…
In this paper, the capacity of continuous-space electromagnetic channels, where transceivers are confined in given lossy regions, is analyzed. First of all, the regions confining the transceivers are assumed to be filled with dielectric,…
A well-known lower bound widely used in the massive MIMO literature hinges on channel hardening, i.e., the phenomenon for which, thanks to the large number of antennas, the effective channel coefficients resulting from beamforming tend to…
The capacity of a fixed Gaussian multiple-input multiple-output (MIMO) channel and the optimal transmission strategy under the total power (TP) constraint and full channel state information are well-known. This problem remains open in the…
Advancements in emerging technologies, e.g., reconfigurable intelligent surfaces and holographic MIMO (HMIMO), facilitate unprecedented manipulation of electromagnetic (EM) waves, significantly enhancing the performance of wireless…
Massive multiple-input multiple-output (mMIMO) antenna systems and inter-band carrier aggregation (CA)-enabled multi-band communication are two key technologies to achieve very high data rates in beyond fifth generation (B5G) wireless…
We establish the optimal input signaling and the capacity of MIMO channels under per-antenna power constraint. While admitting a linear eigenbeam structure, the optimal input is no longer diagonalizable by the channel right singular vectors…
The use of 1-bit analog-to-digital converters (ADCs) is seen as a promising approach to significantly reduce the power consumption and hardware cost of multiple-input multiple-output (MIMO) receivers. However, the nonlinear distortion due…
The point-to-point multiple-antenna channel is investigated in uncorrelated block fading environment with Rayleigh distribution. The maximum throughput and maximum expected-rate of this channel are derived under the assumption that the…
Recently, communication systems that are both spectrum and energy efficient have attracted significant attention. Different from the existing research, we investigate the throughput and energy efficiency of a general class of multiple-input…
In a multi-input multi-output (MIMO) setup, where one side of the link comprises a linear antenna array, data can be transmitted over the direction of incident rays. Channel capacity for this setup is studied in this paper. We define two…
MIMO capacity with a joint total and per-antenna average power constraint is considered in this work. The problem arises when, besides having a limited available power at the transmitter, also the individual antennas cannot radiate power…
In this paper, the channel of an indoor holographic multiple-input multiple-output (MIMO) system is measured. It is demonstrated through experiments for the first time that the spatial oversampling of holographic MIMO systems is able to…
We derive bounds on the noncoherent capacity of a very general class of multiple-input multiple-output channels that allow for selectivity in time and frequency as well as for spatial correlation. The bounds apply to peak-constrained…
The concept of continuous-aperture multiple-input multiple-output (CAP-MIMO) technology has been proposed recently, which aims at achieving high spectrum efficiency by deploying extremely dense antennas or even continuous antennas in a…
A Gaussian multiple-input multiple-output (MIMO) wiretap channel model is considered. The input is a two-antenna transmitter, while the outputs are the legitimate receiver and an eavesdropper, both equipped with multiple antennas. All…
The capacity of commercial massive multiple-input multiple-output (mMIMO) systems is constrained by the limited array aperture at the base station, and cannot meet the ever-increasing traffic demands of wireless networks. Given the array…
Due to the need for higher reliability and performance from RF circuits, multi-port reflectometers are increasingly used as low-overhead impedance monitors. In this work, using periodic structures as multi-ports is proposed. Periodic…
Conventional multiple-input multiple-output (MIMO) systems mainly rely on fixed antenna arrays, which limits their capability to adapt the effective channel matrix to the propagation environment. Rotatable antennas (RAs), which enable…